| ausmini https://www.ausmini.com/forums/ |
|
| Looking for a Steel Brake Line Manufacturer in Adelaide https://www.ausmini.com/forums/viewtopic.php?f=2&t=81200 |
Page 1 of 1 |
| Author: | captainwaldopepper [ Tue Apr 23, 2013 10:58 am ] |
| Post subject: | Looking for a Steel Brake Line Manufacturer in Adelaide |
I'm, replacing the old steel brake lines on my 1964 Mk1 Morris Mini van. I was looking at the copper-nickel ones from Minsport UK but would prefer to buy them locally (also I'm not sure these are legal) Could anyone recommend a good steel brake line manufacturer in Adelaide (preferably South or West of the City)?. Any suggestions would be very much appreciated. Thanks Dave |
|
| Author: | Andy [ Tue Apr 23, 2013 12:14 pm ] |
| Post subject: | |
I've used All Clutch & Brake Service at St Marys before (never had complete lines made up - but im sre they do them) but they've always been very helpful an had everything required in stock. http://www.allclutchandbrake.com.au/about.html |
|
| Author: | captainwaldopepper [ Tue Apr 23, 2013 1:09 pm ] |
| Post subject: | |
Thanks Andy, I'll give them a call (just around the corner too). Cheers Dave |
|
| Author: | ddk848 [ Tue Apr 23, 2013 4:29 pm ] |
| Post subject: | |
+ 1 for All clutch and brake, I've used them a few times and they have been fantastic. The other one to try would be Power Brakes on North East Rd, they seem to be able to repair / recon / make anything, if they don't do steel lines themselves they would probably know of someone who does. Workshops all over Adelaide send cylinders/calipers/boosters to these guys for rebuilding! |
|
| Author: | captainwaldopepper [ Tue Apr 23, 2013 7:59 pm ] |
| Post subject: | |
Thanks Dave, I'll give Power Brakes a try if I have no luck with All Clutch and Brake Service. Cheers Dave |
|
| Author: | slide [ Wed Apr 24, 2013 6:26 pm ] |
| Post subject: | |
Kent Engineering on Port Rd Woodville can make them up. Been around for ever and do all my brake, suspension, axle machining work. Ask for Phil. |
|
| Author: | captainwaldopepper [ Thu Apr 25, 2013 10:32 am ] |
| Post subject: | |
Thanks Slide |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|