| ausmini https://www.ausmini.com/forums/ |
|
| Cooper boot board bracket - Fixed. https://www.ausmini.com/forums/viewtopic.php?f=2&t=81233 |
Page 1 of 1 |
| Author: | haze blue 850 [ Thu Apr 25, 2013 7:58 pm ] |
| Post subject: | Cooper boot board bracket - Fixed. |
Greetings All. I'm about to spray the inner boot on my project. Found, cleaned and primed the boot board brackets. The center one is missing a bit. (refer pic) Looking at a parts site, I seem to be missing a support part. Looking at the rivet holes in the boot floor, I guess it matches the two side brackets but is shorter. This I can make. Does it have a right-angle at the top to sit under the rubber latch? Does anyone have a picture of how it looks, or sits? 
Thanks Alex. [/img] |
|
| Author: | MINImal effort [ Thu Apr 25, 2013 11:25 pm ] |
| Post subject: | |
http://www.minispares.com/product/Classic/Body/Boot/Fittings_seals/14A9782.aspx?030302 Does this help.... |
|
| Author: | haze blue 850 [ Fri Apr 26, 2013 8:01 am ] |
| Post subject: | |
Thanks for the pic. I did find a couple pic,s latter last night, but couldn't see how it joined together. I ended up folding up my own "upright", and brazed it where it touched. Thanks again. Cheers Alex. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|