ausmini https://www.ausmini.com/forums/ |
|
Door Handle Gasket? https://www.ausmini.com/forums/viewtopic.php?f=2&t=82187 |
Page 1 of 1 |
Author: | Thorlek [ Tue Jul 23, 2013 2:40 pm ] |
Post subject: | Door Handle Gasket? |
Hey Guys, Is there a gasket that goes under the door handle on clubmans. i haven't seen one, but my father-in-law insists that there should be one. Thanks |
Author: | michaelb [ Tue Jul 23, 2013 2:57 pm ] |
Post subject: | |
I haven't seen one either so I use some windscreen sealant around the edge of the handle when I refit them. |
Author: | drmini in aust [ Tue Jul 23, 2013 3:19 pm ] |
Post subject: | |
Can't see a Clubby outer handle gasket listed in Mini King's catalog. |
Author: | awdmoke [ Tue Jul 23, 2013 4:40 pm ] |
Post subject: | |
No, but there is supposed to be one under the lock barrel. |
Author: | Thorlek [ Tue Jul 23, 2013 4:55 pm ] |
Post subject: | |
awdmoke wrote: No, but there is supposed to be one under the lock barrel.
Thanks everyone... i have the one for the lock, but it appears the handle has always just done its job 'naked' and who am I to argue with nature ![]() Thanks |
Author: | John Smidt [ Tue Jul 23, 2013 6:46 pm ] |
Post subject: | |
drmini in aust wrote: Can't see a Clubby outer handle gasket listed in Mini King's catalog.
They did not have a gasket on the handle, they used something like silicone, I am not sure exactly what product they used, and of course the lock barrel had a gasket |
Author: | Irish Yobbo [ Thu Jul 25, 2013 7:29 pm ] |
Post subject: | |
When I was particularly poor I needed to replace the lock barrel gaskets, as they were non-existent. I cut them out of an old tire inner-tube. They're still there... |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |