Hey Guys,

Is there a gasket that goes under the door handle on clubmans.

i haven't seen one, but my father-in-law insists that there should be one.

Thanks

_________________
1975 Hairy Lime/White Clubby
Build Thread: http://www.ausmini.com/forums/viewtopic.php?f=3&t=80657

I haven't seen one either so I use some windscreen sealant around the edge of the handle when I refit them.

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S

Can't see a Clubby outer handle gasket listed in Mini King's catalog.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

No, but there is supposed to be one under the lock barrel.

_________________
Too many cars, and too little time.

Thanks everyone... i have the one for the lock, but it appears the handle has always just done its job 'naked' and who am I to argue with nature

Thanks

_________________
1975 Hairy Lime/White Clubby
Build Thread: http://www.ausmini.com/forums/viewtopic.php?f=3&t=80657

They did not have a gasket on the handle, they used something like silicone, I am not sure exactly what product they used, and of course the lock barrel had a gasket

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"

When I was particularly poor I needed to replace the lock barrel gaskets, as they were non-existent. I cut them out of an old tire inner-tube. They're still there...