Yes the one that goes on the Column don't worry I figured out how to pull it apart and change the wafers to fit a key
| ausmini https://www.ausmini.com/forums/ |
|
| Clubman ignition switch https://www.ausmini.com/forums/viewtopic.php?f=2&t=82277 |
Page 1 of 1 |
| Author: | i got a mini [ Wed Jul 31, 2013 9:45 am ] |
| Post subject: | Clubman ignition switch |
Is there any way of pulling these apart to fit a key to them like u can a round nose door lock |
|
| Author: | Irish Yobbo [ Thu Aug 01, 2013 5:34 pm ] |
| Post subject: | |
I think nobody has replied because we don't know what you're talking about... Are you referring to a push button start? |
|
| Author: | mini_mad_matt [ Thu Aug 01, 2013 6:48 pm ] |
| Post subject: | |
I think he means he has a clubman ignition switch, the type on the steering column and he wants to know if you can change the barrel to suit a different key? If so i would assume yes but wouldn't really know |
|
| Author: | i got a mini [ Thu Aug 01, 2013 6:54 pm ] |
| Post subject: | |
Yes the one that goes on the Column don't worry I figured out how to pull it apart and change the wafers to fit a key
|
|
| Author: | Mick [ Thu Aug 01, 2013 7:08 pm ] |
| Post subject: | |
There was a discussion about this from back in February. Clubman Van's had the ignition on the column right?? Anyway, I'll add it in here for information. http://www.ausmini.com/forums/viewtopic ... f0529b7e37 |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|