ausmini
https://www.ausmini.com/forums/

saturday at aldis
https://www.ausmini.com/forums/viewtopic.php?f=2&t=82711		 Page 1 of 2
Author:  drjbeam [ Wed Sep 11, 2013 9:49 pm ]
Post subject:  saturday at aldis
They have some rust protection metal paint for $7.99 for a litre in white green silver black they say its made in germany and paints over old paint
I might get a few cans of black and paint under me guards and the boot floor worth a try at that price

https://www.aldi.com.au/en/special-buys ... -paint-1l/
Author:  MiniBill [ Wed Sep 11, 2013 10:12 pm ]
Post subject:  Re: saturday at aldis
Good price , worth splashing some underneath just for the extra protection.
Author:  drjbeam [ Wed Sep 11, 2013 10:49 pm ]
Post subject:  Re: saturday at aldis
might get to use the electric 12 volt powered jack i got from there a few weeks back

https://www.aldi.com.au/en/special-buys ... /4wd-jack/
Author:  drmini in aust [ Wed Sep 11, 2013 10:57 pm ]
Post subject:  Re: saturday at aldis
drjbeam wrote:
They have some rust protection metal paint for $7.99 for a litre in white green silver black they say its made in germany and paints over old paint
I might get a few cans of black and paint under me guards and the boot floor worth a try at that price

https://www.aldi.com.au/en/special-buys ... -paint-1l/


That paint is good stuff, I used it on a subby 9 months ago and put it in the weather, there's no rust anywhere yet and it's still shiny.
It brushes on and levels out like POR15 does... 8)
Author:  Shaneman29 [ Wed Sep 11, 2013 11:10 pm ]
Post subject:  Re: saturday at aldis
Thanks for the heads up I think I'll have to grab some as well it is rather cheep :D
Author:  MiniBill [ Wed Sep 11, 2013 11:15 pm ]
Post subject:  Re: saturday at aldis
drmini in aust wrote:
drjbeam wrote:
They have some rust protection metal paint for $7.99 for a litre in white green silver black they say its made in germany and paints over old paint
I might get a few cans of black and paint under me guards and the boot floor worth a try at that price

https://www.aldi.com.au/en/special-buys ... -paint-1l/


That paint is good stuff, I used it on a subby 9 months ago and put it in the weather, there's no rust anywhere yet and it's still shiny.
It brushes on and levels out like POR15 does... 8)


Doc do you have to thin it out ? or use as is ?
Author:  drjbeam [ Wed Sep 11, 2013 11:32 pm ]
Post subject:  Re: saturday at aldis
Id say thin it out if spraying and straight out of can if brushing it on like i will do
Author:  drmini in aust [ Thu Sep 12, 2013 12:14 pm ]
Post subject:  Re: saturday at aldis
I brushed it, straight from the can. yes you would need to thin it if spraying. The can says "thin if needed with white spirit (mineral turps)"
Author:  MiniBill [ Fri Sep 13, 2013 12:07 pm ]
Post subject:  Re: saturday at aldis
drmini in aust wrote:
I brushed it, straight from the can. yes you would need to thin it if spraying. The can says "thin if needed with white spirit (mineral turps)"


Awesome cheers for that.
Author:  1275LS [ Sat Sep 14, 2013 8:15 am ]
Post subject:  Re: saturday at aldis
How heat resistant is it?
Author:  drmini in aust [ Sat Sep 14, 2013 8:29 am ]
Post subject:  Re: saturday at aldis
1275LS wrote:
How heat resistant is it?

It is enamel, would be fine to use on an engine, but not on the zorst.
Author:  drjbeam [ Sat Sep 14, 2013 5:41 pm ]
Post subject:  Re: saturday at aldis
Got 4 black 2 silver for rims and for another job 2 white

Only paint with a best before date ive seen
Author:  MiniBill [ Sat Sep 14, 2013 5:50 pm ]
Post subject:  Re: saturday at aldis
drjbeam wrote:
Got 4 black 2 silver for rims and for another job 2 white

Only paint with a best before date ive seen


Didnt notice a best before date on mine " didnt look for one though " i got the opposite of yours beam 4 silver " looks more like grey primer in colour " and 2 black " very black " .
Author:  Shaneman29 [ Sat Sep 14, 2013 7:08 pm ]
Post subject:  Re: saturday at aldis
I picked up 2 tins of black. I did see a used by on mine to.
Author:  drjbeam [ Sat Sep 14, 2013 7:11 pm ]
Post subject:  Re: saturday at aldis
Dont know havent opened a can just went down at 830 got it then come back and finished cleaning up the mini for a car show tomorrow im going to
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/