Hi all, Could someone enlighten me on the thread size for the hydro fitting that bolts through the rear subframe, I hacked the nuts off with a chisel
thanks, Richard
| ausmini https://www.ausmini.com/forums/ |
|
| Hydro rear fitting on subframe https://www.ausmini.com/forums/viewtopic.php?f=2&t=82785 |
Page 1 of 1 |
| Author: | bluewhitecoopers1968 [ Wed Sep 18, 2013 1:12 pm ] |
| Post subject: | Hydro rear fitting on subframe |
Hi all, Could someone enlighten me on the thread size for the hydro fitting that bolts through the rear subframe, I hacked the nuts off with a chisel thanks, Richard
|
|
| Author: | drmini in aust [ Wed Sep 18, 2013 1:33 pm ] |
| Post subject: | Re: Hydro rear fitting on subframe |
Just measured a spare fitting- 5/8-18 UNF, they are halfnuts. |
|
| Author: | bluewhitecoopers1968 [ Wed Sep 18, 2013 1:45 pm ] |
| Post subject: | Re: Hydro rear fitting on subframe |
Ok thanks Doc! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|