Hi all,
Just about to install some minisport adjusta rides but I am wondering whether I need to install the plastic covers on the top as shown in pic, can somebody help please
Cheers Matt
Sent from my HTC One XL using Tapatalk 2
| ausmini https://www.ausmini.com/forums/ |
|
| Minisport adjusta ride https://www.ausmini.com/forums/viewtopic.php?f=2&t=82828 |
Page 1 of 1 |
| Author: | KR4MPT [ Sun Sep 22, 2013 12:56 pm ] |
| Post subject: | Minisport adjusta ride |
Hi all, Just about to install some minisport adjusta rides but I am wondering whether I need to install the plastic covers on the top as shown in pic, can somebody help please Cheers Matt Sent from my HTC One XL using Tapatalk 2 |
|
| Author: | mickmini [ Sun Sep 22, 2013 1:30 pm ] |
| Post subject: | Re: Minisport adjusta ride |
KR4MPT wrote: Hi all, Just about to install some minisport adjusta rides but I am wondering whether I need to install the plastic covers on the top as shown in pic, can somebody help please Cheers Matt Sent from my HTC One XL using Tapatalk 2 Are you expecting the cone to fill with water and other crud and corrode from the inside out? That would be the purpose of the cover. Over a long time, the trumpets do get stuff in them. |
|
| Author: | KR4MPT [ Sun Sep 22, 2013 1:43 pm ] |
| Post subject: | Re: Minisport adjusta ride |
Wasn't sure if they were just included for packaging, with them on and thread wound all the way in they don't sit nicely in rubber cone Sent from my HTC One XL using Tapatalk 2 |
|
| Author: | 1018cc [ Sun Sep 22, 2013 3:10 pm ] |
| Post subject: | Re: Minisport adjusta ride |
You won't be able to have them wound all the way in when they are on the car. The car will ride high for the first little while but the cones should settle down and you'll need to wind them up so you can get over speed bumps. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|