| ausmini https://www.ausmini.com/forums/ |
|
| Morris Bonnet Badge https://www.ausmini.com/forums/viewtopic.php?f=2&t=82890 |
Page 1 of 1 |
| Author: | Mini68 [ Thu Sep 26, 2013 7:31 am ] |
| Post subject: | Morris Bonnet Badge |
Can anyone tell me if a standard Morris Mini bonnet badge uses the same mounting holes as a Morris Cooper bonnet badge? I'm changing from a fake Cooper S to a real Mini Matic and it's heading to the paint shop next week so I need to decide what holes need to be welded up. Thanks. |
|
| Author: | Mick [ Thu Sep 26, 2013 7:32 am ] |
| Post subject: | Re: Morris Bonnet Badge |
Yes, same identical holes. |
|
| Author: | drmini in aust [ Thu Sep 26, 2013 9:06 am ] |
| Post subject: | Re: Morris Bonnet Badge |
Mick is correct, provided it's from the Mk1 S to the early Matic (Mk1) badge. The later Matic used the round Mini K badge and the holes are different. |
|
| Author: | Mini68 [ Thu Sep 26, 2013 12:57 pm ] |
| Post subject: | Re: Morris Bonnet Badge |
Great thanks. Yes I assume it's an early Matic and not a K. I don't have the original body numbers just a Victorian Police number VP...... Looks to be a 68 model Mini Matic. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|