| ausmini https://www.ausmini.com/forums/ |
|
| boot - POLL wow *rare* L@@K https://www.ausmini.com/forums/viewtopic.php?f=2&t=8305 |
Page 1 of 3 |
| Author: | aussie [ Tue Jun 21, 2005 2:04 pm ] |
| Post subject: | boot - POLL wow *rare* L@@K |
Ok so today im gonna do the boot lining, im gonna get my MDF at the hardware store and cut all the right sizes etc. and im using the template posted on here which looks pretty good for size and i have checked all the sizes so im pretty confidnet. So the next thing is what type of carpet do i put in and most of all What colour>? should i make it grey or something like this 
or go out and make it red or some extreme colour? or make it black? |
|
| Author: | GT1360 [ Tue Jun 21, 2005 3:04 pm ] |
| Post subject: | |
what colour is your interior? to it the same.... 
|
|
| Author: | Lillee [ Tue Jun 21, 2005 3:06 pm ] |
| Post subject: | |
red goes harder...
|
|
| Author: | J_A_M [ Tue Jun 21, 2005 3:21 pm ] |
| Post subject: | |
somebody say red??? 
Black shows all the dust and fluff....will you use the boot after its done? If so, go the grey! |
|
| Author: | Fruity [ Tue Jun 21, 2005 3:39 pm ] |
| Post subject: | |
IMO the boot should be the same colour as the interior carpet
|
|
| Author: | aussie [ Tue Jun 21, 2005 6:19 pm ] |
| Post subject: | |
this is what ive done today didnt have to buy the wood because i found some perfect in the shed! [ 
|
|
| Author: | Dylans Clubby [ Tue Jun 21, 2005 6:38 pm ] |
| Post subject: | |
grey looks good, but i reckon if it matches the interior it would be rad. make sure you can still get at your spare!!! |
|
| Author: | aussie [ Tue Jun 21, 2005 6:49 pm ] |
| Post subject: | |
yer you just pull up the base wood and you can get to the spare. if i were to match the enterior at the moment I would have to make it cow (black and white) like my seat covers  which i am definately not doing. the enterior mats atm are just grey so i recon ill go with that.
|
|
| Author: | mini_freak72 [ Tue Jun 21, 2005 7:00 pm ] |
| Post subject: | |
is it imperative that it be coloured?  cow prints?
you're really only going to be putting things in there, and then taking them out again. Go the grey, black is too easy to spot the fluff and crap, as mentioned. unless you go white like the body...? 
|
|
| Author: | aussie [ Tue Jun 21, 2005 7:29 pm ] |
| Post subject: | |
grey it is |
|
| Author: | Dylans Clubby [ Tue Jun 21, 2005 7:49 pm ] |
| Post subject: | |
something that no-one addressed...what sort of carpet? marine carpet would go alright, you want something cheap and tough. marine carpet is tough! but it feels horrible! |
|
| Author: | aussie [ Tue Jun 21, 2005 7:57 pm ] |
| Post subject: | |
yer im thinking marine carpet...like what we got on out boar, tuff stuff! Um yer does anyone know how much some of this stuff would set me back? or are there any other alternatives? |
|
| Author: | lobby69 [ Tue Jun 21, 2005 9:18 pm ] |
| Post subject: | |
dude...that looks sweete! where on ausmini did you find thetemplates? got the link handy? how bout red velour...show boot only,,,,not realy usable material thugh! blake |
|
| Author: | lobby69 [ Tue Jun 21, 2005 9:20 pm ] |
| Post subject: | |
oh...and dont 4get to do the boot lid in the same material...so it fits in!!! |
|
| Author: | drmini in aust [ Tue Jun 21, 2005 9:24 pm ] |
| Post subject: | |
aussie16 wrote: yer im thinking marine carpet...like what we got on out boar, tuff stuff! Um yer does anyone know how much some of this stuff would set me back? or are there any other alternatives?
See here- http://www.biasboating.com.au/carpet.html 
|
|
| Page 1 of 3 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|