ausmini
https://www.ausmini.com/forums/

Rod change coupling and oil seal ( buy local)
https://www.ausmini.com/forums/viewtopic.php?f=2&t=83202		 Page 1 of 2
Author:  cush [ Mon Oct 21, 2013 9:02 pm ]
Post subject:  Rod change coupling and oil seal ( buy local)
( formerly the Rod change oil retention prevention system* thread)

I know you can get a kit to stop this badboy from leaking, but what is the name of the metal part in the picture?

Image

I suspect this (and the pin) needs a replacement too.

Cheers

Oh and hi.. :-)
Author:  KLAS [ Mon Oct 21, 2013 9:41 pm ]
Post subject:  Re: Rod change oil retention prevention system*
42H1116 is its partnumber, called coupling or eye bold sleeve
Author:  boomini [ Mon Oct 21, 2013 10:07 pm ]
Post subject:  Re: Rod change oil retention prevention system*
I would call that f#*cked.... wow never seen one that bad. How did you get gears
Author:  Mokesta [ Mon Oct 21, 2013 11:09 pm ]
Post subject:  Re: Rod change oil retention prevention system*
Wrong Cush! You can buy a kit to slow that thing's leak. You cannot buy a kit to "stop" that thing from leaking.

M

Oh, and welcome back again.
Author:  TheMiniMan [ Tue Oct 22, 2013 7:07 am ]
Post subject:  Re: Rod change oil retention prevention system*
i make new "Seal-bushes" for them Cush

Image

& yes these new ones are removable to enable the replacement of the inner oring :-)
& yes welcome back young fella :-)

N.B. Image display fixed - winabbey
Author:  cush [ Tue Oct 22, 2013 7:22 am ]
Post subject:  Re: Rod change oil retention prevention system*
How might they work? Where to they fit..?

What's it meant to look like? :-)

Sent from my Nexus 7 using Tapatalk
Author:  drmini in aust [ Tue Oct 22, 2013 1:29 pm ]
Post subject:  Re: Rod change oil retention prevention system*
New couplings made in Oz and case hardened are available now from Mini King.
Author:  cush [ Tue Oct 22, 2013 5:45 pm ]
Post subject:  Re: Rod change oil retention prevention system*
I'll have one of Matt's and one of the doc's...

Sent from my Nexus 7 using Tapatalk
Author:  MiniBill [ Tue Oct 22, 2013 5:55 pm ]
Post subject:  Re: Rod change oil retention prevention system*
cush wrote:
I'll have one of Matt's and one of the doc's...

Sent from my Nexus 7 using Tapatalk


You can always grab 1 of these aswell

ROD CHANGE OIL SEAL ENHANCEMENT KIT
Image

Cheers Bill
Author:  cush [ Tue Oct 22, 2013 5:56 pm ]
Post subject:  Re: Rod change oil retention prevention system*
Frooooooooooooooomm..

Sent from my Nexus 7 using Tapatalk
Author:  MiniBill [ Tue Oct 22, 2013 6:00 pm ]
Post subject:  Re: Rod change oil retention prevention system*
cush wrote:
Frooooooooooooooomm..

Sent from my Nexus 7 using Tapatalk

Ooops my bad ..... ebay

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 1299291152

Cheers Bill
Author:  cush [ Tue Oct 22, 2013 6:11 pm ]
Post subject:  Re: Rod change oil retention prevention system*
I thought I knew that logo.. It's wood and Pickett.

Now I know.. I might even change the subject...

Sent from my Nexus 7 using Tapatalk
Author:  mini_mad_matt [ Tue Oct 22, 2013 6:12 pm ]
Post subject:  Re: Rod change oil retention prevention system*
Personally i think Matt's seal is much better then that ebay one. Just knock it in first and then a plain old oil seal and it shouldn't leak again.
Author:  cush [ Tue Oct 22, 2013 6:22 pm ]
Post subject:  Re: Rod change coupling and oil seal ( buy local)
You crazy Matthews must stick together...



http://minisport.com.au/prod593.htm

I'm assuming Matt (Read) your bit replaces the metal part of the above kit?

Sent from my Nexus 7 using Tapatalk
Author:  awdmoke [ Tue Oct 22, 2013 6:41 pm ]
Post subject:  Re: Rod change coupling and oil seal ( buy local)
It does. And it works.

I got a couple of these off Matt about 6 or 7 years ago, still going strong.
You need to use an ordinary seal too. The hard part is getting all the old ones out.
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/