Once you remove the crash pads you'll see everything is as original mini, even hole for ash tray. Not the best photo but you'll see what I mean.
| ausmini https://www.ausmini.com/forums/ |
|
| Dashboard Conversion - Rover to Morris? https://www.ausmini.com/forums/viewtopic.php?f=2&t=83555 |
Page 1 of 1 |
| Author: | BKozan [ Tue Nov 19, 2013 8:58 pm ] |
| Post subject: | Dashboard Conversion - Rover to Morris? |
I'm not a massive fan of my Rover 3 Clock dashboard. I've also just removed my air conditioning, and need to replace the fascia anyway. How hard would it be to revert to the original, center gauge style? In fact - how hard will it be to get all the parts I need? Is it worth my time to consider? Thanks guys! |
|
| Author: | Blunder [ Tue Nov 19, 2013 9:33 pm ] |
| Post subject: | Re: Dashboard Conversion - Rover to Morris? |
I just did this to my wives Rover to get away from standard... http://www.ausmini.com/forums/viewtopic.php?f=2&t=83230 To convert to a old school centre binnacle you need to have a loom conversion/adaptor and obviously the correct old parts! |
|
| Author: | peterb [ Wed Nov 20, 2013 9:01 pm ] |
| Post subject: | Re: Dashboard Conversion - Rover to Morris? |
Once you remove the crash pads you'll see everything is as original mini, even hole for ash tray. Not the best photo but you'll see what I mean.
|
|
| Author: | simon k [ Sat Nov 23, 2013 3:44 pm ] |
| Post subject: | Re: Dashboard Conversion - Rover to Morris? |
I believe there is an adapter loom available, it's a pretty popular thing to do in UK |
|
| Author: | wallie [ Sat Nov 23, 2013 7:46 pm ] |
| Post subject: | Re: Dashboard Conversion - Rover to Morris? |
http://www.minispares.com/product/Class ... 0to%20shop |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|