Hope you can see the hose that's got the bolt in it.... It start off the back of water pump come off above rear output on housing....
Where should it go?
| ausmini https://www.ausmini.com/forums/ |
|
| Where should this hose go? its on a Rover spi https://www.ausmini.com/forums/viewtopic.php?f=2&t=83745 |
Page 1 of 1 |
| Author: | Blunder [ Tue Dec 03, 2013 8:45 pm ] |
| Post subject: | Where should this hose go? its on a Rover spi |
Hope you can see the hose that's got the bolt in it.... It start off the back of water pump come off above rear output on housing.... Where should it go?
|
|
| Author: | Harley [ Tue Dec 03, 2013 9:07 pm ] |
| Post subject: | Re: Where should this hose go? its on a Rover spi |
Don't suppose the engine has an earlier pump fitted and the hose and bolt are just to block off the bypass hole (that shouldn't be there on a SPI)? |
|
| Author: | Blunder [ Tue Dec 03, 2013 9:07 pm ] |
| Post subject: | Re: Where should this hose go? its on a Rover spi |
Just a thought... Is is that a wrong main hose without spi preferences? |
|
| Author: | Blunder [ Tue Dec 03, 2013 9:09 pm ] |
| Post subject: | Re: Where should this hose go? its on a Rover spi |
Ahhh.... That could be it... Will have a look..... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|