| ausmini https://www.ausmini.com/forums/ |
|
| 1098 cylinder heads https://www.ausmini.com/forums/viewtopic.php?f=2&t=84053 |
Page 1 of 1 |
| Author: | boomini [ Thu Jan 02, 2014 7:52 pm ] |
| Post subject: | 1098 cylinder heads |
Hey guys. My 1275 in my van getting a bit tired so im about to pull it out to refurb at a later date since it will be going into my deluxe when it is finished. I got a couple of 1098 engines here both have no cylinder heads. What would be the best head to source. Not after great performance but coming from a 1275 would like a bit. Cheers in advance. Rodney |
|
| Author: | drmini in aust [ Thu Jan 02, 2014 7:59 pm ] |
| Post subject: | Re: 1098 cylinder heads |
Best head for a 1098 (or 998) is a 12G295. If you can find one.. and if you do, crack test before purchase. If not, grab a 202 head and get bigger valves fitted, reshape the chambers and port it a bit. GR had a post here or in the mods forum recently on modding 202 heads. |
|
| Author: | boomini [ Thu Jan 02, 2014 8:06 pm ] |
| Post subject: | Re: 1098 cylinder heads |
Cheers doc. A 202 would be easier to find than a 295 and cheaper. |
|
| Author: | 69k1100 [ Thu Jan 02, 2014 8:41 pm ] |
| Post subject: | Re: 1098 cylinder heads |
If you stuff up a 202 there are plenty more around. Neither me or my father hordes mini parts but there'd have to be more than 10 laying around by accident :p |
|
| Author: | mitchell evans [ Thu Jan 02, 2014 9:20 pm ] |
| Post subject: | Re: 1098 cylinder heads |
I have a fair few here of both types dirt cheap just want them gone |
|
| Author: | boomini [ Thu Jan 02, 2014 9:25 pm ] |
| Post subject: | Re: 1098 cylinder heads |
Cheers mitch been meaning to cone down and see what you have lying around. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|