ausmini
https://www.ausmini.com/forums/

Late model replacement master cylinders
https://www.ausmini.com/forums/viewtopic.php?f=2&t=84116		 Page 1 of 1
Author:  Mick [ Tue Jan 07, 2014 9:25 am ]
Post subject:  Late model replacement master cylinders
Has anyone had a problem with this method of fixing the master cylinder to its mounting flange?

I would expect this to have a bead of weld or braze about it the whole way around. It does have a tack of weld on the other side however.

Image

Image
Author:  simon k [ Tue Jan 07, 2014 8:57 pm ]
Post subject:  Re: Late model replacement master cylinders
wow - cheap!
Author:  drmini in aust [ Tue Jan 07, 2014 9:04 pm ]
Post subject:  Re: Late model replacement master cylinders
+ nasty!
Author:  drjbeam [ Tue Jan 07, 2014 9:18 pm ]
Post subject:  Re: Late model replacement master cylinders
Looks like the first pic weld didnt take to well and come off id take it back to where you brought it
Author:  Mick [ Tue Jan 07, 2014 11:20 pm ]
Post subject:  Re: Late model replacement master cylinders
Cheers
Author:  drjbeam [ Wed Jan 08, 2014 7:49 am ]
Post subject:  Re: Late model replacement master cylinders
If thats a clutch cylinder mine looks the same the brake one has no welds
My welds look like the first pic but no crack
Author:  Aussie Brian [ Wed Jan 08, 2014 1:43 pm ]
Post subject:  Re: Late model replacement master cylinders
That looks full dodgy bro. :shock:
Author:  davem [ Wed Jan 08, 2014 3:00 pm ]
Post subject:  Re: Late model replacement master cylinders
My mate just replaced his and has noticed the plastic cap has a massive crack right through it!
Author:  loveb [ Wed Jan 08, 2014 5:23 pm ]
Post subject:  Re: Late model replacement master cylinders
i welded it at work. should work fine now. i got the cylinder bnew for 40$ I knew there was a crack anyway thats why it was cheap. lol should be all good now!!
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/