| ausmini https://www.ausmini.com/forums/ |
|
| Putting mini back together - Help https://www.ausmini.com/forums/viewtopic.php?f=2&t=84167 |
Page 1 of 1 |
| Author: | RoverMiniNoob [ Sat Jan 11, 2014 11:47 am ] |
| Post subject: | Putting mini back together - Help |
As an update :: I've had my car fully reprinted and purchased a repalcement A+ 998 That has been tested by Matt Reid and seems fine I have put back most of the cosmetic stuff back on the car such as Lights , rubbers windows etc But I Definetly can't do the following From a lack of Tools Time and Talent : put the new engine in : Hook up electrics ( especially in the dash ) : need HiLos fitted : other mechanical stuff Basically all the mechanicals and electrics - Can't Do Interior refit , cosmetics etc - Can do Questions: Is there anyone in brisbane will to do this part for me For a free , beers or a fee Please let me know ASAP as I don't want the car sitting around for much longer I am located on the south side of Bris Can send pics of everything as it is at the moment |
|
| Author: | Kennomini [ Sat Jan 11, 2014 12:52 pm ] |
| Post subject: | Re: Putting mini back together - Help |
Sounds like you want to put on a "workshop party". Get set up for a BBQ and drinks and put an open invite out to anyone that can help on a agreed day to fit the engine, suspension, and hook up the electrics. You should end up with a few guys that know what their doing, so long as you have a decent area/space to work in you should get pretty much everything done. Oh and also let people know if you need them to bring tools and equipment. |
|
| Author: | TK [ Sat Jan 11, 2014 1:51 pm ] |
| Post subject: | Re: Putting mini back together - Help |
Take it to Glen Carpenter's Mini Mart on Blunder Rd, Oxley. He'll give you what you need. |
|
| Author: | 74Club-man [ Sat Jan 11, 2014 6:03 pm ] |
| Post subject: | Re: Putting mini back together - Help |
Kennomini has a good idea if you want to save money. Set up a day with a feed and drinks and see who can help out. |
|
| Author: | Booglie [ Sat Jan 11, 2014 6:42 pm ] |
| Post subject: | Re: Putting mini back together - Help |
I live on the south side of Bris, and i'm keen to lend a hand, let me know when you are ready and i'll pop around. |
|
| Author: | RoverMiniNoob [ Sat Jan 11, 2014 7:38 pm ] |
| Post subject: | Re: Putting mini back together - Help |
Thanks Booglie Will let you know |
|
| Author: | RoverMiniNoob [ Mon Jan 13, 2014 6:11 pm ] |
| Post subject: | Re: Putting mini back together - Help |
Got on to Glen Carpenter Reckons he could fit off the mechanicals sometime Next week for a few bucks $$ Will post some pics and put a a shout out to any interior experts out here When it's time |
|
| Author: | Bubbacluby [ Mon Jan 13, 2014 9:38 pm ] |
| Post subject: | Re: Putting mini back together - Help |
If the motor was tested by Matt Reid, did you ask him to do the above things? He is more than capable |
|
| Author: | CPOCSM [ Tue Jan 14, 2014 12:07 am ] |
| Post subject: | Re: Putting mini back together - Help |
I think that is a great idea and I am in the same predicament. I will come to yours if you come to mine! Hooroo |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|