ausmini
https://www.ausmini.com/forums/

Clubby left engine steady
https://www.ausmini.com/forums/viewtopic.php?f=2&t=8462		 Page 1 of 2
Author:  J_A_M [ Sat Jun 25, 2005 10:14 pm ]
Post subject:  Clubby left engine steady
Can someone with a late clubby please tell me in what order the pieces go on the head for the left engine steady.

I have:

1. A plate that secures the engine steady. Goes under the thermostat housing.

2. An alloy spacer that also goes under the thermostat housing

3. The thermostat housing

Do that attach to the head in that order ^^^^

I need 3 ****** gaskets!! How stupid! You onlu get ONE in a gasket set.
Author:  gafmo [ Sat Jun 25, 2005 10:24 pm ]
Post subject: 
anton i have a spare gasket if it helps :roll:
makka
Author:  J_A_M [ Sat Jun 25, 2005 10:27 pm ]
Post subject: 
maaaaate...you still pissin on down there at gaf's? :lol:

It's ok mate...I will buy 2 from Ivan during the week. He is nice and close for things like that :lol:
Author:  gafmo [ Sat Jun 25, 2005 10:28 pm ]
Post subject: 
yeah mate lol
goin soon got two swaps on tomorrow
Author:  J_A_M [ Sat Jun 25, 2005 10:32 pm ]
Post subject: 
did you bring my harmonic balancer? I need it ASAP!
Author:  gafmo [ Sat Jun 25, 2005 11:26 pm ]
Post subject: 
funny you ask :roll:
no i forgot but i'll get it to you
Author:  Circus_Maximus [ Sun Jun 26, 2005 12:32 am ]
Post subject: 
Um, my engine steady goes on over the top of the thermostat housing? Only one gasget needed.
Author:  Mike [ Sun Jun 26, 2005 6:29 am ]
Post subject: 
bin the gaskets and use sylastic - worked for me. Plus no need for a scraper - new gasket - + gasket compound every time you take the housing off - just pull the silicon off (real easy), apply a new layer and let it harden for 10 mins - perfect and doesnt leak - just use the good quality gasket maker stuff, not just simlple silicone.
Author:  J_A_M [ Sun Jun 26, 2005 7:58 am ]
Post subject: 
Circus_Maximus wrote:
Um, my engine steady goes on over the top of the thermostat housing? Only one gasget needed.


yea? and no spacer?

is the engine steady level from the head to the firewall?, or is it on a angle?

this is the best pic I have of JAM's bay prior to resto. JAM was 100% original. The steady mount is definitely under the thermostat housing....

Image
Author:  benjamin [ Sun Jun 26, 2005 8:08 am ]
Post subject: 
mines under the thermastat ill go take a pic after i eat breakfast :)
Author:  benjamin [ Sun Jun 26, 2005 8:23 am ]
Post subject: 
mine goes:

gasket then engine steady then gasket then thermastat no spacer :?

if i were you id put the spacer under the engine steady as mine is very close to the head :wink:
Author:  J_A_M [ Sun Jun 26, 2005 8:35 am ]
Post subject: 
hmmm.....i had a look at that idea, but that would put the engine steady plate very close to the thermo housing and rad hose where it attaches to the thermo housing.

Is your engine steady level?
Author:  benjamin [ Sun Jun 26, 2005 8:43 am ]
Post subject: 
yeh its pretty much level here a pic you can just see it

Image
Author:  J_A_M [ Sun Jun 26, 2005 8:49 am ]
Post subject: 
sweet...thanx for that. 8)

I have a different thermo housing and rad. My top hose is at the rear.

Where did ya get the rad cap bling cover? I want one of them :wink:
Author:  benjamin [ Sun Jun 26, 2005 8:53 am ]
Post subject: 
i got it for christmas :wink: probally get em from autobarn
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/