1123cc ? whats that +0.030"
Mate, like the good Doc always says....
There is no substitute for cubic inches!
| ausmini https://www.ausmini.com/forums/ |
|
| what should i do? https://www.ausmini.com/forums/viewtopic.php?f=2&t=8466 |
Page 1 of 1 |
| Author: | BLACKRZ_667 [ Sun Jun 26, 2005 12:46 am ] |
| Post subject: | what should i do? |
Hey all is it better to keep the original 998cc motor in my clubby or would it be better to put a fully worked 1123cc? |
|
| Author: | h0nk [ Sun Jun 26, 2005 12:48 am ] |
| Post subject: | |
What are you after? reliablilty, performance? What's your budget like? |
|
| Author: | BLACKRZ_667 [ Sun Jun 26, 2005 12:59 am ] |
| Post subject: | |
well i have got an 1123cc lined up i was just wondering for performance and reliability what would run better what would be the quickest ect.... |
|
| Author: | SnoBall [ Sun Jun 26, 2005 1:14 am ] |
| Post subject: | |
it all comes down to what either engine is built like, the larger one could out last the 998 if built properly and vice verca, talk to the willson twins in derwent park rd. they'll tell you all u need to know. |
|
| Author: | J_A_M [ Sun Jun 26, 2005 8:19 am ] |
| Post subject: | |
1123cc ? whats that +0.030" Mate, like the good Doc always says.... There is no substitute for cubic inches!
|
|
| Author: | BLACKRZ_667 [ Sun Jun 26, 2005 12:03 pm ] |
| Post subject: | |
OOPS 
my bad 1132cc (40thou rebore) lol thanks |
|
| Author: | Dylans Clubby [ Sun Jun 26, 2005 1:03 pm ] |
| Post subject: | |
40 thou is the best rebore isnt it? because its not the largest so you still have some more to play with if it needs a bore in the future?? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|