| ausmini https://www.ausmini.com/forums/ |
|
| timing light pick up https://www.ausmini.com/forums/viewtopic.php?f=2&t=84681 |
Page 1 of 1 |
| Author: | kiwiinwgtn [ Fri Feb 21, 2014 7:41 pm ] |
| Post subject: | timing light pick up |
I have broken the inductive pick up on my optilux timing light. Where would I start looking for a replacement. No luck searching the net. I might try repco tomorrow Kiwiinwgtn |
|
| Author: | phillb [ Fri Feb 21, 2014 8:43 pm ] |
| Post subject: | Re: timing light pick up |
kiwiinwgtn wrote: I have broken the inductive pick up on my optilux timing light. Where would I start looking for a replacement. No luck searching the net. I might try repco tomorrow Kiwiinwgtn Can u put up a photo. I have a busted Optilux light but the pickup might be the same. It's the style that looks like a torch shape with the gauge on the end. Pretty old. If I find a pick I'll post it. Edit. Same as the one here. http://en.wikipedia.org/wiki/Timing_light |
|
| Author: | kiwiinwgtn [ Sun Feb 23, 2014 8:33 am ] |
| Post subject: | Re: timing light pick up |
Yep thats the one. The problem with mine is I had to cut the wire as it had a break in it and the ferrite c pick up is broken as it must have been dropped Pm on what you want for it Ta Bernard |
|
| Author: | phillb [ Sun Feb 23, 2014 2:43 pm ] |
| Post subject: | Re: timing light pick up |
Just postage. Only thing is it stopped working for me and I never worked out if it was the pickup or not. You can have the whole light if you want as spares or just the pu and cord. I'll work out postage if you give me the address. Phill |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|