| ausmini https://www.ausmini.com/forums/ |
|
| 1275 primary gear https://www.ausmini.com/forums/viewtopic.php?f=2&t=84847 |
Page 1 of 1 |
| Author: | carter [ Sat Mar 08, 2014 8:02 pm ] |
| Post subject: | 1275 primary gear |
Hey fellas just wandering what a 1275 primary gear is worth. Cheers |
|
| Author: | TK [ Sat Mar 08, 2014 8:39 pm ] |
| Post subject: | Re: 1275 primary gear |
Geez, condition? |
|
| Author: | carter [ Sat Mar 08, 2014 8:54 pm ] |
| Post subject: | Re: 1275 primary gear |
Good nick ready to use. Down to ones that need a new bronze bush. |
|
| Author: | drmini in aust [ Sat Mar 08, 2014 9:12 pm ] |
| Post subject: | Re: 1275 primary gear |
I sold one with a new floating front bush fitted, for $120. |
|
| Author: | carter [ Sat Mar 08, 2014 9:13 pm ] |
| Post subject: | Re: 1275 primary gear |
Ok cool so if ones not in real good nick what would you say 40-50? |
|
| Author: | drmini in aust [ Sat Mar 08, 2014 9:18 pm ] |
| Post subject: | Re: 1275 primary gear |
Primary gear floating front bush is $30-$40 to buy. If the outer (flanged) bush is buggered too the gear is worth a lot less- as that one is a press fit and must be bored to size after fitting. |
|
| Author: | carter [ Sat Mar 08, 2014 9:20 pm ] |
| Post subject: | Re: 1275 primary gear |
Ok thanks doc |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|