IMGP2158 by k_green1310, on Flickr
I got mine from Repco for $27 but they are cheaper on the web.
http://www.eziautoparts.com.au/pcv-valve-pcv-013.html
| ausmini https://www.ausmini.com/forums/ |
|
| Inline PCV Valve https://www.ausmini.com/forums/viewtopic.php?f=2&t=84987 |
Page 1 of 1 |
| Author: | goodie [ Sun Mar 23, 2014 9:26 am ] |
| Post subject: | Inline PCV Valve |
I've tried searching with no luck , but can someone throw up a pic & part No , (or the thread ) of an inline PCV Valve that others have used before , I think it was Doc's . Cheers . |
|
| Author: | drmini in aust [ Sun Mar 23, 2014 9:33 am ] |
| Post subject: | Re: Inline PCV Valve |
IMGP2158 by k_green1310, on Flickr I got mine from Repco for $27 but they are cheaper on the web. http://www.eziautoparts.com.au/pcv-valve-pcv-013.html |
|
| Author: | goodie [ Sun Mar 23, 2014 9:41 am ] |
| Post subject: | Re: Inline PCV Valve |
Perfect , thanks Doc . |
|
| Author: | ryan [ Sun Mar 23, 2014 12:58 pm ] |
| Post subject: | Re: Inline PCV Valve |
I got mine from the local auto supplier for $16. They even had it on the shelf. |
|
| Author: | drmini in aust [ Sun Mar 23, 2014 3:05 pm ] |
| Post subject: | Re: Inline PCV Valve |
ryan wrote: I got mine from the local auto supplier for $16. They even had it on the shelf. = They are common, fit a Toyota. |
|
| Author: | kiwiinwgtn [ Sun Mar 23, 2014 6:13 pm ] |
| Post subject: | Re: Inline PCV Valve |
I need to install one if these. How does it all get plumbed in. |
|
| Author: | drmini in aust [ Sun Mar 23, 2014 7:09 pm ] |
| Post subject: | Re: Inline PCV Valve |
kiwiinwgtn wrote: I need to install one if these. How does it all get plumbed in. It goes between the breather and the inlet manifold, same as it would on a Cooper S or other 1275 without an SU vac port. Works like the S breather but no parts to replace. You are supposed to use with a Cooper S/1100S breather cap but I found they work fine with a sealed cap. Rocker cover needs to be sealed, unless you are using it as the breather like I do. see the ezyautoparts link I gave above for flow direction. |
|
| Author: | justminis [ Sun Mar 23, 2014 8:05 pm ] |
| Post subject: | Re: Inline PCV Valve |
There is also a PCV-014 which has 9.6mm one end (to suit vac hose) and 12.7mm the other end that suits heater hose which will connect straight onto the mini breathers. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|