I am on the hunt for two of the tools to complete my tool board.
Slide hammer and bush remover.
Does anyone have them who could post a picture so I can see what I am chasing.
| ausmini https://www.ausmini.com/forums/ |
|
| sykes picavent tools https://www.ausmini.com/forums/viewtopic.php?f=2&t=85001 |
Page 1 of 1 |
| Author: | kiwiinwgtn [ Sun Mar 23, 2014 4:57 pm ] |
| Post subject: | sykes picavent tools |
I am on the hunt for two of the tools to complete my tool board. Slide hammer and bush remover. Does anyone have them who could post a picture so I can see what I am chasing. |
|
| Author: | drmini in aust [ Sun Mar 23, 2014 4:59 pm ] |
| Post subject: | Re: sykes picavent tools |
Slide hammer is generic, they all work the same, only the thread on the end varies. Go check out Repco or Supercrap... |
|
| Author: | kiwiinwgtn [ Sun Mar 23, 2014 5:10 pm ] |
| Post subject: | Re: sykes picavent tools |
It really needs to be the right one to fit on the board. I will make one if I can not locate an original. Its the bush puller which my be the challenge. Its taken me 20 years to collect these ones. Its the hunting thats fun. |
|
| Author: | winabbey [ Sun Mar 23, 2014 7:14 pm ] |
| Post subject: | Re: sykes picavent tools |
I'll look through the BMC service tool books to see if I can find what you are after. In the meantime, a simple Google search on sykes 378h slide hammer shows the following. Even though the number is different I'd reckon one of these would suit. http://www.tridon.com.au/Products/Produ ... 5&P=393956 Googling bush remover brings up this: http://sykes-pickavant.com/products/sus ... stallation |
|
| Author: | boomini [ Sun Mar 23, 2014 7:30 pm ] |
| Post subject: | Re: sykes picavent tools |
That is cool. |
|
| Author: | Minimadmarty [ Sun Mar 23, 2014 8:38 pm ] |
| Post subject: | Re: sykes picavent tools |
I want one...... The child in me still giggles when anyone mentions a slide hammer he he..... |
|
| Author: | kiwiinwgtn [ Sun Apr 13, 2014 7:04 pm ] |
| Post subject: | Re: sykes picavent tools |
winabbey wrote: I'll look through the BMC service tool books to see if I can find what you are after. In the meantime, a simple Google search on sykes 378h slide hammer shows the following. Even though the number is different I'd reckon one of these would suit. http://www.tridon.com.au/Products/Produ ... 5&P=393956 Googling bush remover brings up this: http://sykes-pickavant.com/products/sus ... stallation Thanks the Slide hammer looks promising. |
|
| Author: | kiwiinwgtn [ Tue Jun 28, 2016 9:40 pm ] |
| Post subject: | Re: sykes picavent tools |
Got the steering bush puller today. Brand new from the uk. Slide hammer is all thats left and the board is complete. |
|
| Author: | Lillee [ Wed Jun 29, 2016 4:19 pm ] |
| Post subject: | Re: sykes picavent tools |
Wow.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|