| ausmini https://www.ausmini.com/forums/ |
|
| 1275 crankshaft values? https://www.ausmini.com/forums/viewtopic.php?f=2&t=85186 |
Page 1 of 1 |
| Author: | Kennomini [ Mon Apr 07, 2014 8:49 pm ] |
| Post subject: | 1275 crankshaft values? |
Now I know this is a broad question but what are they worth? 1100S L journal, 1100S S journal, generic 1275, Mk 1, Mk 2, A+ etc etc and lets assume they have been crack tested but may need machining? |
|
| Author: | drmini in aust [ Tue Apr 08, 2014 7:23 am ] |
| Post subject: | Re: 1275 crankshaft values? |
OK I'll bite- These days a crank regrind is $200 in Sydney so if worn, the buyer needs to add that before it's useable. My opinion only- I'd say that assuming it needs a grind, and the crank will clean up at -.010" or -.020": 998 crank = $50 1098 crank = $75 1100S big journal = $200, also A+ 1100S small journal = $200 S crank Mk1 EN40B = $300 S crank Mk2 EN16T = $250-300 YMMV. Disclaimer- If the cranks are unworn or have a fresh grind they are obviously worth more, if they are going to need a -.040" grind to clean up they are worth less. If talking 1098 cranks, a std or -.010" one is stronger, if the motor is going to get a rev. [edit] I would NOT buy a crank without crack testing it first, most are 40 or more years old and many are cracked. Except 998s, they are more bulletproof it seems. |
|
| Author: | Kennomini [ Tue Apr 08, 2014 6:27 pm ] |
| Post subject: | Re: 1275 crankshaft values? |
Thanks Doc, What about NOS cranks or can you buy repro/new Cranks these days? |
|
| Author: | drmini in aust [ Tue Apr 08, 2014 7:01 pm ] |
| Post subject: | Re: 1275 crankshaft values? |
Kennomini wrote: Thanks Doc, What about NOS cranks or can you buy repro/new Cranks these days? You can buy NOS EN40B Cooper S cranks, Kc still lists them. $2.5K or thereabouts. You can get new 1275A+ cranks from UK cheap (Minisport) but the freight cost sucks. There are now excellent 8 counterweighted race cranks, made in Melbourne. GR sells one version, there are a few variations. Budget $3.5-4.0K approx. Overkill for a road car??? [edit] Kenno, are you buying? Or selling? |
|
| Author: | Kennomini [ Tue Apr 08, 2014 8:18 pm ] |
| Post subject: | Re: 1275 crankshaft values? |
Looking at buying, I have a spare 1100S block, head and a few sets of rods just no crank. If I can find a crank sometime in the future I'd be happy (this isn't needed I just want to find the parts to build a engine). |
|
| Author: | s-c1293 [ Tue Apr 08, 2014 9:14 pm ] |
| Post subject: | Re: 1275 crankshaft values? |
Try giving Neil from www.coopersimports.com a call. Last time I saw him he had 1275 A+ Minisport cranks for around the $500 mark. |
|
| Author: | Moke2b [ Thu Apr 10, 2014 5:51 am ] |
| Post subject: | Re: 1275 crankshaft values? |
I may have one if your interested. I'm sure it's a large journal as it was out of of a 79 1275 Moke. Needs cleaning up though. |
|
| Author: | drmini in aust [ Thu Apr 10, 2014 7:36 am ] |
| Post subject: | Re: 1275 crankshaft values? |
Moke2b wrote: I may have one if your interested. I'm sure it's a large journal as it was out of of a 79 1275 Moke. Needs cleaning up though. I have a set of big journal rods here to suit that, they belong to Lillee. He's listed them in parts for sale forum, cheap. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|