| ausmini https://www.ausmini.com/forums/ |
|
| rear bump stops ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=85290 |
Page 1 of 1 |
| Author: | junior [ Wed Apr 16, 2014 9:18 am ] |
| Post subject: | rear bump stops ? |
Currently rebuilding a dry rear sub frame, should I re-route the flexible brake line from the top of the arm to the underside so I can run bump stops? |
|
| Author: | drmini in aust [ Wed Apr 16, 2014 1:20 pm ] |
| Post subject: | Re: rear bump stops ? |
If you want to run bumpstops, you will need to. Put a hoseclamp round the arm to hold the pipe in position. Instructions are in the comp bumpstop kit. Kc carries the bumpstop kit in stock. |
|
| Author: | junior [ Wed Apr 16, 2014 3:55 pm ] |
| Post subject: | Re: rear bump stops ? |
Thanks Kev What would you run up front in the way of a bump stop? |
|
| Author: | drmini in aust [ Wed Apr 16, 2014 4:06 pm ] |
| Post subject: | Re: rear bump stops ? |
junior wrote: Thanks Kev What would you run up front in the way of a bump stop? Standard conical ones. Either dry, or hydro. Do NOT run the comp hydro front ones unless you are going rallying.. they are way too tall. As I found out... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|