ausmini https://www.ausmini.com/forums/ |
|
Engine ID https://www.ausmini.com/forums/viewtopic.php?f=2&t=85380 |
Page 1 of 1 |
Author: | Phil 850 [ Tue Apr 22, 2014 9:06 pm ] |
Post subject: | Engine ID |
I have looked for a list on Ausmini but unable to find one. Can anyone enlighten me on my engine. 12YD/Ta/Hxxxxx It came fitted in my 64 model 850. Phil |
Author: | FNQ [ Tue Apr 22, 2014 9:19 pm ] |
Post subject: | Re: Engine ID |
i have a motor with the same references and was told it came off a morri1100S non auto? depending on your last numbers ''the 1100S had tufftrided small journal crank (better) & S rods up until #10,500 approx, '' and then it changed to large journal i think edit the knowledge is not mine, was from this site many years ago in reply to a similar query.. sorry can't refind the thread to acknowledge the original author but thanks ausmini |
Author: | gtogreen1969 [ Tue Apr 22, 2014 9:20 pm ] |
Post subject: | Re: Engine ID |
1275cc from an 1100S |
Author: | Phil 850 [ Tue Apr 22, 2014 9:43 pm ] |
Post subject: | Re: Engine ID |
Thanks Guy's So ! 12 = 1275 Y = Australian D = morris"? Ta = ? H = High Compression ? 13727 = Engine number |
Author: | gtogreen1969 [ Tue Apr 22, 2014 9:47 pm ] |
Post subject: | Re: Engine ID |
Close. Have a look here. http://www.elevenhundred.com/enginenum.php |
Author: | drmini in aust [ Tue Apr 22, 2014 9:52 pm ] |
Post subject: | Re: Engine ID |
Phil 850 wrote: Thanks Guy's
So ! 12 = 1275 yes Y = Australian yes D = morris"? D= later series (early were just `Y' above) Ta = ? remote shift H = High Compression ? yes 13727 = Engine number yes |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |