ausmini
https://www.ausmini.com/forums/

Re-upholstery
https://www.ausmini.com/forums/viewtopic.php?f=2&t=85381		 Page 1 of 2
Author:  Asiemek [ Tue Apr 22, 2014 9:31 pm ]
Post subject:  Re-upholstery
Can anyone tell me what it will cost to re-upholster my front and rear 65 deluxe seats? anyone recommend a good trimmer in Melbourne/Geelong area?
Author:  IwannaMini [ Wed Apr 23, 2014 2:57 pm ]
Post subject:  Re: Re-upholstery
I asked a guy in Sydney what it would cost to re-upholster two Cobra fixed back sports seats and was told $500... EACH SEAT...

Considering I bought the two of them for $400 I am considering my options.
Author:  Morris 1100 [ Wed Apr 23, 2014 4:09 pm ]
Post subject:  Re: Re-upholstery
I got a whole car retrimmed for $800.
Author:  Wombat [ Wed Apr 23, 2014 4:15 pm ]
Post subject:  Re: Re-upholstery
Morris 1100 wrote:
I got a whole car retrimmed for $800.



But that was 1987
Author:  Morris 1100 [ Wed Apr 23, 2014 4:34 pm ]
Post subject:  Re: Re-upholstery
About three years ago.
Author:  Monaco [ Wed Apr 23, 2014 7:15 pm ]
Post subject:  Re: Re-upholstery
I got a valiant bench seat (springs repaired), reboulstered and trimmed in original type vinyl for $400.
Author:  Asiemek [ Wed Apr 23, 2014 9:22 pm ]
Post subject:  Re: Re-upholstery
Monaco wrote:
I got a valiant bench seat (springs repaired), reboulstered and trimmed in original type vinyl for $400.


where abouts?
Author:  Monaco [ Wed Apr 23, 2014 11:29 pm ]
Post subject:  Re: Re-upholstery
Asiemek wrote:
Monaco wrote:
I got a valiant bench seat (springs repaired), reboulstered and trimmed in original type vinyl for $400.


where abouts?


TAS! :(
Author:  Mokesta [ Wed Apr 23, 2014 11:37 pm ]
Post subject:  Re: Re-upholstery
I am in the middle of installing a Newton Commercial trim set. Total 850 interior except front seats. It is a pain in the rear but I think it will look good finished. So if you can't get a good price on a trimmer, buy the trim and install it yourself. You just need glue, scissors, trim clips from Minispares and 1000 bulldog clips.

M
Author:  surtees [ Thu Apr 24, 2014 8:17 am ]
Post subject:  Re: Re-upholstery
What was the price of the trim Mokesta?
Author:  ALPINE MOKE [ Thu Apr 24, 2014 3:06 pm ]
Post subject:  Re: Re-upholstery
Two 1971 clubman seats with head rests, used BMW 318i leather which I supplied.

Collected them to-day $680

Nice job by a guy in Bright Vic
Author:  Asiemek [ Thu Apr 24, 2014 4:03 pm ]
Post subject:  Re: Re-upholstery
ALPINE MOKE wrote:
Two 1971 clubman seats with head rests, used BMW 318i leather which I supplied.

Collected them to-day $680

Nice job by a guy in Bright Vic



Can I grab a contact mate.
Author:  Asiemek [ Thu Apr 24, 2014 4:03 pm ]
Post subject:  Re: Re-upholstery
Mokesta wrote:
I am in the middle of installing a Newton Commercial trim set. Total 850 interior except front seats. It is a pain in the rear but I think it will look good finished. So if you can't get a good price on a trimmer, buy the trim and install it yourself. You just need glue, scissors, trim clips from Minispares and 1000 bulldog clips.

M


Can you point me towards where to get the trim set?
Author:  MrFail [ Thu Apr 24, 2014 6:03 pm ]
Post subject:  Re: Re-upholstery
I got the newton interior in mine too.
I got someone else to install the hoodlining for me but did the rest myself.

I found the people at Newton to be very helpful in our email correspondence in figuring out what bits I needed.
Author:  MrFail [ Thu Apr 24, 2014 6:04 pm ]
Post subject:  Re: Re-upholstery
http://www.newtoncomm.co.uk/home/
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/