ausmini https://www.ausmini.com/forums/ |
|
split exhaust https://www.ausmini.com/forums/viewtopic.php?f=2&t=85461 |
Page 1 of 2 |
Author: | Davo111 [ Sun Apr 27, 2014 9:14 pm ] |
Post subject: | split exhaust |
I have just noticed a vertical split in my tail pipe just after my Cat, other than blowing numerous holes trying to weld it up, and being a stingy old ning nong like Mick, any ideas on how to cover it so its a little quieter would be appreciated, I will eventually have it replaced, but I need a quick fix just for now. PS, its about 4 inches long.... |
Author: | Davo111 [ Sun Apr 27, 2014 9:15 pm ] |
Post subject: | Re: split exhaust |
that auto correct is a pi55er, LOL??? |
Author: | Mick [ Sun Apr 27, 2014 9:22 pm ] |
Post subject: | Re: split exhaust |
Who's stingy! Just economical... Trouble with patches is that its more effort to keep it from leaking again.... The gas always seems to persevere and make its way out. A thin piece of alloy (like a ally can) with a few hose clamps to hold it on spring to mind. A muffler shop could run a bead of weld along it as well to seal it up. |
Author: | i got a mini [ Sun Apr 27, 2014 9:52 pm ] |
Post subject: | Re: split exhaust |
Just cut it out and weld a new bit in there that's wat a muffler shop would do |
Author: | Wayne King [ Mon Apr 28, 2014 5:49 am ] |
Post subject: | Re: split exhaust |
Soup can. Hose clamps. Maniseal. |
Author: | goodie [ Mon Apr 28, 2014 7:03 am ] |
Post subject: | Re: split exhaust |
Souldn't be a problem Davo , weren't you wrapping it up and putting it away for the Winter ? That'll give you about 4 months to save up and buy a new one ![]() ![]() |
Author: | timmy201 [ Mon Apr 28, 2014 7:12 am ] |
Post subject: | Re: split exhaust |
Wayne King wrote: Soup can. Hose clamps. Maniseal. I agree! |
Author: | Davo111 [ Mon Apr 28, 2014 11:17 am ] |
Post subject: | Re: split exhaust |
yeah mate, it is being put into hybernation over the colder months, but its one of those things that seem to get away from you, if you don't do it now, it will come back and haunt you at the start of the ext mini season. There is always that special thing that comes back and bites you on the bum when you least want it to, and this is one of those, Thanks for the hints I will give the Pea a n d Ham, suggestion a run. :-$ |
Author: | frednutz&co [ Mon Apr 28, 2014 11:34 am ] |
Post subject: | Re: split exhaust |
don't use coke cans they are no good ask hooley ![]() |
Author: | drjbeam [ Mon Apr 28, 2014 6:25 pm ] |
Post subject: | Re: split exhaust |
http://m.supercheapauto.com.au/Product/ ... r-Kit/5353 Ive used something like this on a renault me grandfather had around 1992 |
Author: | Morris 1100 [ Mon Apr 28, 2014 6:27 pm ] |
Post subject: | Re: split exhaust |
drjbeam wrote: http://m.supercheapauto.com.au/Product/Permatex-1000-Degree-Plus-Exhaust-Repair-Kit/5353 Ive used something like this on a renault me grandfather had around 1992 Isn't that just a soup can, some hose clamps and some maniseal in a packet? ![]() |
Author: | MG Rocket [ Mon Apr 28, 2014 6:30 pm ] |
Post subject: | Re: split exhaust |
Once upon a time I repaired a back of a rusted muffler on a EA Falcon with a bit of thin gal and JB Weld to get it by rego and it stayed there for nearly a year. |
Author: | drmini in aust [ Mon Apr 28, 2014 7:00 pm ] |
Post subject: | Re: split exhaust |
Do it once do it right, get an offcut of zorst pipe and fire up the MIG. ![]() |
Author: | drjbeam [ Mon Apr 28, 2014 7:08 pm ] |
Post subject: | Re: split exhaust |
Morris 1100 wrote: drjbeam wrote: http://m.supercheapauto.com.au/Product/Permatex-1000-Degree-Plus-Exhaust-Repair-Kit/5353 Ive used something like this on a renault me grandfather had around 1992 Isn't that just a soup can, some hose clamps and some maniseal in a packet? ![]() stuff we used was like a bandage it lasted till he wrote it off |
Author: | Davo111 [ Mon Apr 28, 2014 8:16 pm ] |
Post subject: | Re: split exhaust |
O K Doc, if you dont mind I will pop up and see you tomorrow arvo, boy I wish you lived a bit closer, only joking, thanks all for the advice, I will give the can a go first and see what happens. |
Page 1 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |