ausmini • View topic - Oil pressure issue

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Oil pressure issue

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 6 posts ]

Print view

Previous topic | Next topic

Author

Message

danny_

Post subject: Oil pressure issue

Posted: Tue Apr 29, 2014 3:47 pm

998cc

Joined: Sat Jul 23, 2011 9:32 pm
Posts: 1171
Location: Sydney (St George area)

Hi guys,
I seem to be having some oil pressure issues with my mini and i am not sure why..
My usual oil pressure is 60 when cold at idle and start up is 75psi and when hot its 18-20psi
I undid my oil pressure re-leaf valve as i wanted to see whether or not it had a ball bearing inside of it.
It turns out its just a standard spring with no packing and standard plunger.

After i did it all up again my start up oil pressure is over 100psi (gauge reads to 100) and it will be like that for about 10min while idling at 1000rpm.
What would cause this and how do i fix it? I don't want my oil filter popping off while i am plodding along.

_________________
http://www.flickr.com/by_dan
Current: 1970 Mini K 2014 Focus ST
Past: 93 Rover, 64 850, 97 Rover, 66 Deluxe, 66 Moke
81 Austin Estate, 2006 R53MCS, 66 Deluxe, 1978 Clubbie
2014 Land Rover Defender 90

Top

simon k

Post subject: Re: Oil pressure issue

Posted: Tue Apr 29, 2014 4:14 pm

Yay For Hay!

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15912
Location: Wodonga - Vic/NSW border

the plunger must be jammed in - take it out and have another look

first thing you should've done after you got 100psi is think "what did I change", and then check it...

_________________
did I tell you that I won a trophy?

Top

drmini in aust

Post subject: Re: Oil pressure issue

Posted: Tue Apr 29, 2014 4:17 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW

If there are any marks on the side of the plunger sand them off, or fit a new plunger.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

danny_

Post subject: Re: Oil pressure issue

Posted: Tue Apr 29, 2014 4:21 pm

998cc

Joined: Sat Jul 23, 2011 9:32 pm
Posts: 1171
Location: Sydney (St George area)

What size dynabolt should I use?

Top

drmini in aust

Post subject: Re: Oil pressure issue

Posted: Tue Apr 29, 2014 4:33 pm

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW

10mm I think. push in and then turn the nut with fingers, it makes a handy handle...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

danny_

Post subject: Re: Oil pressure issue

Posted: Tue Apr 29, 2014 4:37 pm

998cc

Joined: Sat Jul 23, 2011 9:32 pm
Posts: 1171
Location: Sydney (St George area)

Edit:
Got it out.. needed a lot of force.
Edit2:

Nice big gash

Top

Page 1 of 1

[ 6 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 320 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: