ausmini
https://www.ausmini.com/forums/

Door pockets
https://www.ausmini.com/forums/viewtopic.php?f=2&t=85518
Page 1 of 1

Author:  womble99 [ Thu May 01, 2014 11:17 am ]
Post subject:  Door pockets

With the recent talk about kick plates it has me looking at my doors again. Are door pockets available as a replacement item or do I need to search for second hand ones to replace mine?

Cj

Author:  womble99 [ Fri May 02, 2014 9:15 am ]
Post subject:  Re: Door pockets

I am guessing from the response they are nla and it is a case of good luck finding second hand ones :(

Author:  Mick [ Fri May 02, 2014 12:05 pm ]
Post subject:  Re: Door pockets

Ive got spares here somewhere. I made my own from upholstery card and covered with vinyl.

Two types of door card, clubman cards were slightly improved over earlier with better coverage up the side of the door pocket. If you have no luck let me know.

Author:  womble99 [ Fri May 02, 2014 12:20 pm ]
Post subject:  Re: Door pockets

Thanks Mick but I am looking for the metal pocket itself on the wind up roundie doors. Mine are rusted through in places and I think will be beyond repair....

So far all my searching has turned up nothing so I guess it is either try to repair or find a second hand replacement.

CJ

Author:  Bubbacluby [ Fri May 02, 2014 5:14 pm ]
Post subject:  Re: Door pockets

I have a pair in my shed, if your interested?

send me a pm

Author:  winabbey [ Fri May 02, 2014 5:37 pm ]
Post subject:  Re: Door pockets

Just checked with John Smidt and the answer is no, the door pocket was not made as a separately replaceable item. You will need to find a donor door or a new door.

Author:  drjbeam [ Fri May 02, 2014 7:56 pm ]
Post subject:  Re: Door pockets

John smidt top man i also gave him a call today not about door pockets but

Author:  boomini [ Fri May 02, 2014 10:34 pm ]
Post subject:  Re: Door pockets

Got a mint set of pockets here

Author:  drjbeam [ Fri May 02, 2014 11:25 pm ]
Post subject:  Re: Door pockets

http://www.bmh-ltd.com/ send them a email they still make complete bodys in the uk i see a pocket in the catologe but has a number for whole door 59-69

Author:  womble99 [ Fri May 02, 2014 11:33 pm ]
Post subject:  Re: Door pockets

drjbeam wrote:
http://www.bmh-ltd.com/ send them a email they still make complete bodys in the uk i see a pocket in the catologe but has a number for whole door 59-69


Aren't the UK pockets the deep ones though like an 850?

Author:  drjbeam [ Sat May 03, 2014 12:24 am ]
Post subject:  Re: Door pockets

Sorry Dont know

Author:  drmini in aust [ Sat May 03, 2014 12:56 pm ]
Post subject:  Re: Door pockets

womble99 wrote:
drjbeam wrote:
http://www.bmh-ltd.com/ send them a email they still make complete bodys in the uk i see a pocket in the catologe but has a number for whole door 59-69


Aren't the UK pockets the deep ones though like an 850?


Yes, they will not fit Oz windup doors properly.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/