| ausmini https://www.ausmini.com/forums/ |
|
| Aussie rocker cover https://www.ausmini.com/forums/viewtopic.php?f=2&t=85543 |
Page 1 of 1 |
| Author: | bluewhitecoopers1968 [ Sat May 03, 2014 4:08 pm ] |
| Post subject: | Aussie rocker cover |
So I'm wondering what cars this rocker cover came on. It has Australia with Mowog stamped in and no breather ? Pic on the way |
|
| Author: | bluewhitecoopers1968 [ Sat May 03, 2014 4:09 pm ] |
| Post subject: | Re: Aussie rocker cover |
|
|
|
| Author: | Morris 1100 [ Sat May 03, 2014 4:12 pm ] |
| Post subject: | Re: Aussie rocker cover |
Probably an 1100S. |
|
| Author: | Mick [ Sat May 03, 2014 4:16 pm ] |
| Post subject: | Re: Aussie rocker cover |
No breather would usually mean PCV fitted cars right? Like the 1100S fitted confusingly with 1275 engines? What about 1100 autos? |
|
| Author: | Morris 1100 [ Sat May 03, 2014 4:18 pm ] |
| Post subject: | Re: Aussie rocker cover |
Yes. So it could be an 1100S or a Mk2 Cooper S and possibly a Morris 1300 Automatic. The Cooper S will have notches for the extra head nuts. |
|
| Author: | bluewhitecoopers1968 [ Sat May 03, 2014 5:33 pm ] |
| Post subject: | Re: Aussie rocker cover |
Thanks, no notches so nothing special then. |
|
| Author: | Mick [ Sat May 03, 2014 5:36 pm ] |
| Post subject: | Re: Aussie rocker cover |
Well, apparently fitted to GT's if you have a chat to them. Someone may be after one, but I'm not sure how easy they are to get. I've seen a few. Not a difficult thing to notch at all. |
|
| Author: | goodie [ Sat May 03, 2014 8:26 pm ] |
| Post subject: | Re: Aussie rocker cover |
I have a complete 1300 Automatic engine with the original tappet cover , it has the Mowog symbol , no notches ,but it has a breather . |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|