| ausmini https://www.ausmini.com/forums/ |
|
| Lockheed Mk 1 Booster Kit? https://www.ausmini.com/forums/viewtopic.php?f=2&t=85595 |
Page 1 of 1 |
| Author: | low n blown [ Wed May 07, 2014 7:55 am ] |
| Post subject: | Lockheed Mk 1 Booster Kit? |
I recall a while ago someone posted that the kits were available for the early style booster. can anyone recall where the kits can be obtained from. Thanks G. |
|
| Author: | Mick [ Wed May 07, 2014 9:50 am ] |
| Post subject: | Re: Lockheed Mk 1 Booster Kit? |
Yep, they're available from J&L Spares, Powerboost, and lots of other places all of a sudden. The pure seal kits are also on ebay all the time. I have a spare kit here in case they disapear again.. However I use J&L as they have the kits, the pushrods, the airvalves, everything you need, not just the rubber. Good turn around too I have found, and prices are up front. http://www.jlspares.co.uk/sealkits.htm |
|
| Author: | gtogreen1969 [ Wed May 07, 2014 10:00 am ] |
| Post subject: | Re: Lockheed Mk 1 Booster Kit? |
I only needed to re-kit the hydraulic side of my booster. I took the seals into the local seal and bearing shop and only cost about $2 per seal. |
|
| Author: | low n blown [ Wed May 07, 2014 5:10 pm ] |
| Post subject: | Re: Lockheed Mk 1 Booster Kit? |
awesome thanks lads. G. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|