ausmini :: View topic - Clubman GT Stripe

Australian Mini GT Stripes. Available in a wide range of colours. We have modified the decal so it will fit both the Mini Clubman and the standard mini shape front. Fantastic reproduction, we ship these to Australian suppliers as they are that good.

I have a file already drawn up - taken off a set of NOS genuine stripes - if that's of interest.

ClubmanGT wrote:

I have a file already drawn up - taken off a set of NOS genuine stripes - if that's of interest.

I might be, what format is it in?

Here's the factory instructions for installation of the GT stripes.

Attachment:

HYB4716 Installation GT Decorative Striping Tape reduced.jpg

Author:	Minute [ Mon May 12, 2014 10:56 pm ]
Post subject:	Clubman GT Stripe
Hi All, Where do you get Clubman GT Stripes like the one pictured below? Claeten

Author:	Minute [ Mon May 12, 2014 10:57 pm ]
Post subject:	Re: Clubman GT Stripe
Hmm..Image doesnt seem to have worked. Its the one that goes over the bonnet and down the sides

Author:	wallie [ Mon May 12, 2014 11:04 pm ]
Post subject:	Re: Clubman GT Stripe
minisport over here in SA have them http://minisport.com.au/mini-black-full ... n-ordering

Author:	timmy201 [ Tue May 13, 2014 2:08 pm ]
Post subject:	Re: Clubman GT Stripe
Or from the UK.. Possibly the source for minisport? They're about $120 shipped http://idlegear.co.uk/mini-decals-body- ... ripes.html Quote: Australian Mini GT Stripes. Available in a wide range of colours. We have modified the decal so it will fit both the Mini Clubman and the standard mini shape front. Fantastic reproduction, we ship these to Australian suppliers as they are that good.

Author:	Morris 1100 [ Tue May 13, 2014 6:19 pm ]
Post subject:	Re: Clubman GT Stripe
Quote: Australian Mini GT Stripes. Available in a wide range of colours. We have modified the decal so it will fit both the Mini Clubman and the standard mini shape front. Fantastic reproduction, we ship these to Australian suppliers as they are that good. They can't be that good, they are in the wrong place on the bonnet..

ausmini https://www.ausmini.com/forums/

Clubman GT Stripe https://www.ausmini.com/forums/viewtopic.php?f=2&t=85658	Page 1 of 2

Author:	Minute [ Wed May 14, 2014 12:01 am ]
Post subject:	Re: Clubman GT Stripe
Looks as if they made them to sit too far back on the mini. But that's the one I want Now can you get them custom? Its going on a clubman s. Does anyone make them with an s instead of the gt?

Author:	timmy201 [ Wed May 14, 2014 7:18 am ]
Post subject:	Re: Clubman GT Stripe
There is also this guy, who makes them himself from what I gather. He custom does most of the work, so I'm sure he could do some S instead of GT. http://martincull.create.net/ourshop/pr ... ripes.html His 1275GT ones can be changed to have any text you want, so he should do the Aussie ones too http://martincull.create.net/ourshop/pr ... ripes.html

Author:	73GT [ Fri May 08, 2015 8:14 pm ]
Post subject:	Re: Clubman GT Stripe
Hi I want to draw up a set of stripes. Can someone please give me the dimensions, ie Horizontal side strip; small strip gap big stripe bonnet stripe; small strip gap big stripe gap med stripe total width at end total width at centre length & width of 3 rectangle slots thanks

Author:	ClubmanGT [ Sat May 09, 2015 3:41 am ]
Post subject:	Re: Clubman GT Stripe
I have a file already drawn up - taken off a set of NOS genuine stripes - if that's of interest.

Author:	73GT [ Sat May 09, 2015 7:15 am ]
Post subject:	Re: Clubman GT Stripe
thanks for the offer, PM sent

Author:	winabbey [ Sat May 09, 2015 2:26 pm ]
Post subject:	Re: Clubman GT Stripe
Here's the factory instructions for installation of the GT stripes. Attachment: HYB4716 Installation GT Decorative Striping Tape reduced.jpg

Author:	Hobson [ Sat May 09, 2015 2:44 pm ]
Post subject:	Re: Clubman GT Stripe
ClubmanGT wrote: I have a file already drawn up - taken off a set of NOS genuine stripes - if that's of interest. I might be, what format is it in?

Author:	ClubmanGT [ Sat May 09, 2015 4:08 pm ]
Post subject:	Re: Clubman GT Stripe
Hobson wrote: ClubmanGT wrote: I have a file already drawn up - taken off a set of NOS genuine stripes - if that's of interest. I might be, what format is it in? Illustrator CS3

Author:	Bubbacluby [ Sat May 09, 2015 9:32 pm ]
Post subject:	Re: Clubman GT Stripe
WOW Doug. So there was a factory correct position for stripes. That's awesome. Thankyou for sharing

Page 1 of 2	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/

Author:	73GT [ Sun May 10, 2015 7:26 am ]
Post subject:	Re: Clubman GT Stripe
winabbey wrote: Here's the factory instructions for installation of the GT stripes. Attachment: HYB4716 Installation GT Decorative Striping Tape reduced.jpg Thanks Winabbey It is amazing the infomation that is out there that most of us havent seen & that it is freely shared. Can you confirm the position dimensions stated on the drawing.