| ausmini https://www.ausmini.com/forums/ |
|
| Will these seatbelts satisfy ADR for compliancing https://www.ausmini.com/forums/viewtopic.php?f=2&t=85718 |
Page 1 of 1 |
| Author: | RoverMiniNoob [ Sun May 18, 2014 9:57 pm ] |
| Post subject: | Will these seatbelts satisfy ADR for compliancing |
Need get some front and rear seat belts for my Rover Jap Can anyone advise if these will work as far as compliance http://www.ebay.com.au/itm/REDDYS-UNIVE ... e50&_uhb=1 |
|
| Author: | Thorlek [ Sun May 18, 2014 11:42 pm ] |
| Post subject: | Re: Will these seatbelts satisfy ADR for compliancing |
To be 100% sure you'd need to see the tag on belt A google search of Reddy's Seatbelts doesn't bring up much.... to be 100% sure, buy some from HEMCO Or another known brand like KLIPPAN which you can get from Repco, or plently of online stores. |
|
| Author: | 1071 S [ Mon May 19, 2014 8:44 pm ] |
| Post subject: | Re: Will these seatbelts satisfy ADR for compliancing |
You need to ring your local rego authority and ask. That way you get advice rather than opinions. While you can read the ADRs to find what standards apply you should be aware that, being ADR compliant does not mean acceptable to State rego authorities. ie an item can be ADR compliant but be refused at registration. ISO 9001 (as quoted) is a quality standard not a technical standard.... Cheers, Ian |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|