| ausmini https://www.ausmini.com/forums/ |
|
| Rear 1/4 window seal. https://www.ausmini.com/forums/viewtopic.php?f=2&t=85919 |
Page 1 of 1 |
| Author: | Mick [ Mon Jun 02, 2014 4:00 pm ] |
| Post subject: | Rear 1/4 window seal. |
Did I see somewhere that this was available from Clark's Rubber, or it is a specialist rubber? cheers Mick |
|
| Author: | drmini in aust [ Mon Jun 02, 2014 6:59 pm ] |
| Post subject: | Re: Rear 1/4 window seal. |
I used the Karcraft ones, they fit good. It's the windup door rubbers that are generic, you can buy XD Falcon ones by the metre, it's the same stuff. NOT for sliding window doors... |
|
| Author: | peterb [ Mon Jun 02, 2014 7:15 pm ] |
| Post subject: | Re: Rear 1/4 window seal. |
Clark rubber make a smaller version of the door opening one, haven't tried it yet but I will when I convert the Rover fixed windows. |
|
| Author: | Mick [ Mon Jun 02, 2014 7:51 pm ] |
| Post subject: | Re: Rear 1/4 window seal. |
So neither of these? http://www.clarkrubber.com.au/catalogse ... t/?q=pinch |
|
| Author: | drmini in aust [ Mon Jun 02, 2014 8:03 pm ] |
| Post subject: | Re: Rear 1/4 window seal. |
Mick wrote: 2nd one looks close. Grab a sample? |
|
| Author: | Mick [ Mon Jun 02, 2014 8:17 pm ] |
| Post subject: | Re: Rear 1/4 window seal. |
It does look close. I'll take a look tomorrow. Its not cheaper however at $17 per meter. |
|
| Author: | drjbeam [ Tue Jun 03, 2014 8:41 am ] |
| Post subject: | Re: Rear 1/4 window seal. |
Spectrum rubber or rare spares Download the spectrum product guide to get the profiles They have moved to penrith now http://www.spectrumrubber.com.au/ |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|