Yer when I do that it goes off the other side of the screen even more And yes it self parks
I was thinking mayb the clubbie wiper motors have more throw on them then a old 850 one
| ausmini https://www.ausmini.com/forums/ |
|
| Wiper blades running off screen :( https://www.ausmini.com/forums/viewtopic.php?f=2&t=85922 |
Page 1 of 1 |
| Author: | i got a mini [ Mon Jun 02, 2014 5:38 pm ] |
| Post subject: | Wiper blades running off screen :( |
Ok guys I have a 850 mini where the wipers park on the drivers side. When I turn the wipers on they go off window screen on both sides, where they park and the other side ?? Would I have the wrong wiper motor in it ?? The wiper motor is out of a clubbie |
|
| Author: | Kennomini [ Mon Jun 02, 2014 6:06 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Try pulling the wiper arms off the splines then put a "tab" of tape on each one, then turn them on and let them self park. this should show you where the wiper arms should be put on. So long as the motor self parks properly. |
|
| Author: | i got a mini [ Mon Jun 02, 2014 6:09 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Yer when I do that it goes off the other side of the screen even more And yes it self parks I was thinking mayb the clubbie wiper motors have more throw on them then a old 850 one
|
|
| Author: | Kennomini [ Mon Jun 02, 2014 6:27 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
I have a two speed, round body, clubby motor on my 62 850 and it works fine. |
|
| Author: | i got a mini [ Mon Jun 02, 2014 6:28 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Hmmm now I'm really confused lol |
|
| Author: | Kennomini [ Mon Jun 02, 2014 6:33 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Do they just seem to fall off the windscreen? maybe the worm drive or the gearboxes are worn at that spot only... |
|
| Author: | i got a mini [ Mon Jun 02, 2014 6:34 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Yer u can move them when they r parked quite a lot |
|
| Author: | Kennomini [ Mon Jun 02, 2014 6:40 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Might be time to pull it all out and inspect the parts. |
|
| Author: | i got a mini [ Mon Jun 02, 2014 6:42 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
Hmm will have a look after work tomorrow c wat I find |
|
| Author: | slacko [ Mon Jun 02, 2014 11:22 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
There are different degree wheels in the wiper motors take the steel cover off the wiper motor and look at the round plate inside the cog wheel it will have numbers stamped on it , eg 105 , 110 |
|
| Author: | drmini in aust [ Tue Jun 03, 2014 7:45 am ] |
| Post subject: | Re: Wiper blades running off screen :( |
The wheel boxes are different, I think the 850 & Deluxe RH park ones have a smaller gear than the LH park Mini K and Clubby ones with the round motor. So the wipers then go too far unless you change the wheel boxes too. |
|
| Author: | peterb [ Tue Jun 03, 2014 1:38 pm ] |
| Post subject: | Re: Wiper blades running off screen :( |
You mention the wheel boxes are worn, you could just use the clubman wheel boxes and arms. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|