They won't be original as they are UK made. Thinner too. And you will have to mod them, if you want the hydro pipe channels in.
But, it's all that's available now really.
| ausmini https://www.ausmini.com/forums/ |
|
| floor panels https://www.ausmini.com/forums/viewtopic.php?f=2&t=8631 |
Page 1 of 1 |
| Author: | Gezo [ Thu Jun 30, 2005 7:32 pm ] |
| Post subject: | floor panels |
Hi, Where is the best place to get genuine front and rear floor panels. They are for a 1970 mini. Thanks |
|
| Author: | aaron [ Thu Jun 30, 2005 7:39 pm ] |
| Post subject: | |
Karcraft 9 eggerton st Silverwater 02 9737 9011 www.karcraft.com.au [email protected] it'll cost you roughly $150 - 200 for all three panels. Call em, there one of the best. Cheers Aaron |
|
| Author: | drmini in aust [ Thu Jun 30, 2005 7:53 pm ] |
| Post subject: | |
They won't be original as they are UK made. Thinner too. And you will have to mod them, if you want the hydro pipe channels in. But, it's all that's available now really.
|
|
| Author: | Beefa [ Thu Jun 30, 2005 9:09 pm ] |
| Post subject: | |
Ive found Minis Plus have repair panels as well, Im getting the rear ones for Beefa and they are 129.95 for the both rear ones. http://www.minis.com.au/ They have a lot of good stuff! |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|