ausmini
https://www.ausmini.com/forums/

engine size
https://www.ausmini.com/forums/viewtopic.php?f=2&t=8685		 Page 1 of 1
Author:  mini_me [ Sat Jul 02, 2005 7:55 am ]
Post subject:  engine size
Can anyone tell me what size engine is in my
1976 clubby(998 or 1098),
the engine number starts with 99H834AJH

thanks Felix
Author:  gafmo [ Sat Jul 02, 2005 8:00 am ]
Post subject: 
998
Check this page out
http://www.hotbricks.org.au/ Tech Tips
Author:  drmini in aust [ Sat Jul 02, 2005 8:26 am ]
Post subject: 
Was a 998 with smog head & air pump, when built, but many have had a 1098 crank put in since. i've got one... J_A_M's got one.. :lol:
Author:  mini_me [ Sat Jul 02, 2005 8:54 am ]
Post subject:  engine size
Thanks for the info guys.When I bought the
car the owner did say it was a 998 motor,
but after looking at ebay this morning I had
my doubts as the car on ebay was built very
close to mine.
Mine still has all the polution gear fitted ,it is totally original.
Felix
Author:  mini_me [ Sat Jul 02, 2005 8:55 am ]
Post subject:  engine size
Thanks for the info guys.When I bought the
car the owner did say it was a 998 motor,
but after looking at ebay this morning I had
my doubts as the car on ebay was built very
close to mine.
Mine still has all the polution gear fitted ,it is totally original.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1


Felix
Author:  kazjim [ Sat Jul 02, 2005 9:11 am ]
Post subject: 
but the engine number of that one is for a 998 also !

99H834AJH

99 (998) H (Front Wheel Drive)

THink that is right...

J
Author:  J_A_M [ Sat Jul 02, 2005 8:08 pm ]
Post subject:  Re: engine size
mini_me wrote:
Mine still has all the polution gear fitted ,it is totally original.
Felix


so was JAM..... :lol:
Author:  drmini in aust [ Sat Jul 02, 2005 8:15 pm ]
Post subject:  Re: engine size
mini_me wrote:
Mine still has all the polution gear fitted ,it is totally original.


Felix

If the air pump still works, it is a collectors item.. :lol:
Author:  J_A_M [ Sat Jul 02, 2005 8:25 pm ]
Post subject: 
mine does :wink:

maybe I should ebay it for big $$$

:lol: yea right!
Author:  min13k [ Sat Jul 02, 2005 11:13 pm ]
Post subject: 
i have a working air pump :)
may have to ebay it just to see how far it will go up :)
makka
Author:  mini_me [ Sun Jul 03, 2005 8:28 am ]
Post subject:  engine size
I have not been able to start the engine yet.
Tried with a set of jumper leads, engine turns
but will not start,I think theres no spark.
Anyway I am concentrating on the body first
then I'll remove the head and convert it to unleaded.
I presume to check the air pump all you need to feel
is some air coming out of it with engine running?
Felix
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/