| ausmini https://www.ausmini.com/forums/ |
|
| mini ute conversion and panel van query https://www.ausmini.com/forums/viewtopic.php?f=2&t=86892 |
Page 1 of 1 |
| Author: | cooperbill [ Sat Aug 16, 2014 11:01 am ] |
| Post subject: | mini ute conversion and panel van query |
Sold |
|
| Author: | womble99 [ Sat Aug 16, 2014 11:08 am ] |
| Post subject: | Re: mini ute conversion and panel van query |
Sorry to hear of your loss Bill. If you can post some pictures the guys on here will be better able to help you out with an idea on what you are dealing with. Cj |
|
| Author: | mickmini [ Sat Aug 16, 2014 11:29 am ] |
| Post subject: | Re: mini ute conversion and panel van query |
Also let us know the location (town or suburb is good enough). Transport can make a difference to the price people are prepared to pay. |
|
| Author: | cooperbill [ Sat Aug 16, 2014 5:03 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
Thanks for the feedback, have edited the whole post |
|
| Author: | Kennomini [ Sat Aug 16, 2014 5:51 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
The ute looks rust free but needs a fair bit of work and engineering approval I'd assume, (also a rear window would be nice). The 1100S is worth a bit and those mags are a bit uncommon so worth a bit more. Does it have doors and an interior? without them I'd say the ute as it sits would be around $2000. The van looks a bit rough, what size engine is it? It looks more complete parts wise. It could be $1500 to $2000 depending on engine, set in rust and interior condition. The Yellow shell looks rust free but could probable benefit from panel work and a repaint so I'd say $500 to $1000. Hope this helps a bit, your location could affect the price (I'm not familiar with NSW). |
|
| Author: | Scoop [ Sat Aug 16, 2014 6:38 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
The ute is cool. I wouldn't have the heart to cut one up myself, but seeing as its already done I could see myself with that. A roundy in tassie seems to go for more than that. |
|
| Author: | cooperbill [ Sat Aug 16, 2014 10:02 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
. |
|
| Author: | cooperbill [ Sat Aug 16, 2014 10:04 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
the 1100s motor in the ute is around 110hp and running |
|
| Author: | Kennomini [ Sat Aug 16, 2014 11:01 pm ] |
| Post subject: | Re: mini ute conversion and panel van query |
In that case the ute could be close to $3000, can it be test driven on the property? That'll give a potential buyer a better idea of what it really can do. Dose it have disc brakes? Also their is no 975cc engine, if you can tell us the engine numbers of all the engines you have we'll be able to tell you what you have and what they may be worth? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|