Can anyone identify / translate this engine number?
LBB10476 - 100157
It's been stamped on a plate that's been riveted on top of the original engine number!
Cheers
| ausmini https://www.ausmini.com/forums/ |
|
| Engine Identification Please https://www.ausmini.com/forums/viewtopic.php?f=2&t=86905 |
Page 1 of 1 |
| Author: | Minimadmarty [ Sun Aug 17, 2014 11:09 am ] |
| Post subject: | Engine Identification Please |
Can anyone identify / translate this engine number? LBB10476 - 100157 It's been stamped on a plate that's been riveted on top of the original engine number! Cheers |
|
| Author: | 1071 S [ Sun Aug 17, 2014 2:39 pm ] |
| Post subject: | Re: Engine Identification Please |
I would suggest that is actually the original engine no. Its how they did it in the UK... and maybe other OS markets.... When the engines were imported into Oz they ground off the head of the rawl pins and stamped the number on the block. The plate was then hung off one of the hoses with a bit of tie wire. Maybe Gold or Silver Seal replacement engine??? Cheers, Ian |
|
| Author: | Minimadmarty [ Sun Aug 17, 2014 2:47 pm ] |
| Post subject: | Re: Engine Identification Please |
Cheers Ian, it is claimed to be a UK import 1275 A+ SPI I'm just trying to verify it. |
|
| Author: | Morris 1100 [ Sun Aug 17, 2014 4:10 pm ] |
| Post subject: | Re: Engine Identification Please |
I think it is the right code for an SPI. |
|
| Author: | peterb [ Sun Aug 17, 2014 5:48 pm ] |
| Post subject: | Re: Engine Identification Please |
It's the right colours for a 1275 motor from the UK..........orange with lots of rust. 
|
|
| Author: | KLAS [ Sun Aug 17, 2014 11:04 pm ] |
| Post subject: | Re: Engine Identification Please |
LBB means it's a service replacement, reconditioned engine IIRC LBB10476 is a "Cooper" SPi engine, 10:1 CR, 63HP |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|