| ausmini https://www.ausmini.com/forums/ |
|
| Rear Floor Pan https://www.ausmini.com/forums/viewtopic.php?f=2&t=87154 |
Page 1 of 1 |
| Author: | Dabid [ Wed Sep 10, 2014 6:06 pm ] |
| Post subject: | Rear Floor Pan |
Hi all, Is there anywhere I can get the rear floor pan LH and RH from for an Australian Clubman? I can only find the UK ones that the pressing doesn't line up. Any help would be much appreciated |
|
| Author: | Goldbrocade_62 [ Wed Sep 10, 2014 7:49 pm ] |
| Post subject: | Re: Rear Floor Pan |
No one at this stage makes them best bet is to get one out of another car or try and get a sheety to make one |
|
| Author: | pturnedge [ Wed Sep 10, 2014 9:16 pm ] |
| Post subject: | Re: Rear Floor Pan |
I used 2 front aussie pressings and performed a little cut and shut job. The only things, I had to remould the ends of the swages in the rear and shift the rear 2 of the mounting holes for the pipe cover plates. Came out quite well if I do say so myself.     
|
|
| Author: | 69k1100 [ Wed Sep 10, 2014 9:18 pm ] |
| Post subject: | Re: Rear Floor Pan |
I have a rear uk floor pressing but will attempt to section it lengthways to line up the flutes, then weld it all back together. |
|
| Author: | IndigoBlueCooperS [ Wed Sep 10, 2014 10:09 pm ] |
| Post subject: | Re: Rear Floor Pan |
I would try Cooper S Imports in Victoria. From memory he had some on display at Watto's Grand Day Out. They included the front and rear in one pressing. |
|
| Author: | boomini [ Wed Sep 10, 2014 10:46 pm ] |
| Post subject: | Re: Rear Floor Pan |
Pm sent |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|