ausmini
https://www.ausmini.com/forums/

what LCB is this?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=87295		 Page 1 of 1
Author:  junior [ Wed Sep 24, 2014 2:35 pm ]
Post subject:  what LCB is this?
What type of LCB are these & what are they like?

Image
Author:  drmini in aust [ Wed Sep 24, 2014 4:35 pm ]
Post subject:  Re: what LCB is this?
Looks like a Perry? or similar. Made in Oz.
Does the Y piece slip off vertically?
They work OK, better suited to smallbore motors than a 1275 IMO.
Author:  junior [ Wed Sep 24, 2014 4:55 pm ]
Post subject:  Re: what LCB is this?
drmini in aust wrote:
Looks like a Perry? or similar. Made in Oz.
Does the Y piece slip off vertically?
They work OK, better suited to smallbore motors than a 1275 IMO.



yep, Y piece slips of vertically.

Think I might get a set of Maniflow LCB's or the chinese knock off's (not sure who has these)
Author:  Diesel27 [ Wed Sep 24, 2014 5:09 pm ]
Post subject:  Re: what LCB is this?
Off topic but cant help comment on the Chineese parts.
I work at a Turbo and fuel company, we sell lots of chineese parts as some OEM stuff is way too expensive.
Most stuff is ok, but when you spend two 22 hour days overhauling a ship Turbo obviously in situ and the new casing leaks water as the casting is porus then that is a problem.
Author:  Mick [ Wed Sep 24, 2014 5:50 pm ]
Post subject:  Re: what LCB is this?
Diesel27 wrote:
Off topic but cant help comment on the Chineese parts.
I work at a Turbo and fuel company, we sell lots of chineese parts as some OEM stuff is way too expensive.
Most stuff is ok, but when you spend two 22 hour days overhauling a ship Turbo obviously in situ and the new casing leaks water as the casting is porus then that is a problem.


When they have a need to, then they can be the best in the world. Our 20 layer motherboard smartphones are after all made in China... They'll get better over time rest assured.
Author:  Scoop [ Wed Sep 24, 2014 7:40 pm ]
Post subject:  Re: what LCB is this?
They can build quality but that costs. Wholesalers would rather order the cheapest stuff cos they dont think anybody will pay for a quality item.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/