| ausmini https://www.ausmini.com/forums/ |
|
| Front Drum Hubs https://www.ausmini.com/forums/viewtopic.php?f=2&t=87581 |
Page 1 of 1 |
| Author: | cd_design [ Sun Oct 26, 2014 9:41 am ] |
| Post subject: | Front Drum Hubs |
Are both the hubs the same on the front? as in, if you strip the front drum down to the basic hub, can I use any on either side? One of my hubs is worn on the inside, bearings are loose on the outside and really tight on the inside. Think I'd rather replace it to be on the safe side. Thanks for any help.. |
|
| Author: | TheMiniMan [ Sun Oct 26, 2014 10:12 am ] |
| Post subject: | Re: Front Drum Hubs |
no, they`re sided,, as in a left hub is a left hub & a right is a right i have hundreds of them if you`re stuck Matt 0407 135 656 (07)3399 99 99 |
|
| Author: | cd_design [ Sun Oct 26, 2014 10:35 am ] |
| Post subject: | Re: Front Drum Hubs |
OK. How do I tell left from right? I'll check and let you know what I need. Thanks |
|
| Author: | cd_design [ Sun Oct 26, 2014 1:55 pm ] |
| Post subject: | Re: Front Drum Hubs |
Looking at before photos, it shows the grease nipples to the front with steering arm mount to the top. Looks like I need a drivers side hub |
|
| Author: | drjbeam [ Sun Oct 26, 2014 6:24 pm ] |
| Post subject: | Re: Front Drum Hubs |
Upper and lower Ball joint Grease nipples face the front on both sides Mini kingdom online has about 100 nos drivers side ones but no passenger side ones nos I needed a passenger side one the other week and john let me go through the nos ones all drivers side ones but I think it was $40-$45 for a nos one |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|