Thanks guys,I'm looking at a new project that I'll talk about later.I couldn't see any differences,but I wanted to be certain.
| ausmini https://www.ausmini.com/forums/ |
|
| Body differences https://www.ausmini.com/forums/viewtopic.php?f=2&t=8759 |
Page 1 of 1 |
| Author: | FIGJAM [ Mon Jul 04, 2005 9:36 am ] |
| Post subject: | Body differences |
Guy's I know were getting really in depth here,but is there any difference between the rolling body of a 76 model and the 78 model? Sizes,pressings,anything ? I know in the Coopers the window sizes etc were different but I thought around that time the clubby bodies were standard. The earilier 74 models looked a lot different. |
|
| Author: | drmini in aust [ Mon Jul 04, 2005 9:44 am ] |
| Post subject: | Re: Body differences |
FIGJAM wrote: Guy's I know were getting really in depth here,but is there any difference between the rolling body of a 76 model and the 78 model? Sizes,pressings,anything ?
I know in the Coopers the window sizes etc were different but I thought around that time the clubby bodies were standard. The earilier 74 models looked a lot different. AFAIK all Oz Clubbie bodies are the same pressings that includes windows and doors. |
|
| Author: | Mini Mad [ Mon Jul 04, 2005 9:50 am ] |
| Post subject: | |
Some of the earlier ones (pre-74) still had the roundnose rotiserie holes in them though... |
|
| Author: | FIGJAM [ Mon Jul 04, 2005 12:04 pm ] |
| Post subject: | |
Thanks guys,I'm looking at a new project that I'll talk about later.I couldn't see any differences,but I wanted to be certain.
|
|
| Author: | min13k [ Mon Jul 04, 2005 4:19 pm ] |
| Post subject: | |
i thought it was pre 77 that still had the holes makka josh when ya back man ?? |
|
| Author: | benjamin [ Mon Jul 04, 2005 4:20 pm ] |
| Post subject: | |
mines a 76 and has the hole in the centr under the bonnet but no hole in the boot for rotissory |
|
| Author: | drmini in aust [ Mon Jul 04, 2005 5:13 pm ] |
| Post subject: | |
They stopped rotodipping when Mini production went to Enfield. 1974?? somewhere round then.. 
That's why the later ones rust more... 
|
|
| Author: | Morris 1100 [ Mon Jul 04, 2005 5:51 pm ] |
| Post subject: | |
I have a 76 with the hole in the fire wall and a 78 without the hole. They moved the bonnet prop bracket on the inner guard by a couple of inches sometime between 76 and 78. All oz cars had the same size windows (even the cooper s)
|
|
| Author: | Dylans Clubby [ Mon Jul 04, 2005 6:06 pm ] |
| Post subject: | |
did they all have the wind up windows? or did only the earlier ones? did any aussie minis have sliding windows??? |
|
| Author: | Harley [ Mon Jul 04, 2005 6:24 pm ] |
| Post subject: | |
Yep. 61-64 I think. |
|
| Author: | Mini Mad [ Mon Jul 04, 2005 11:04 pm ] |
| Post subject: | |
min13k wrote: i thought it was pre 77 that still had the holes
makka josh when ya back man ?? Just got back 
You have your own pool room! 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|