I am about to do mine from newton commercial Fingers crossed.
| ausmini https://www.ausmini.com/forums/ |
|
| 2 Piece Headlining https://www.ausmini.com/forums/viewtopic.php?f=2&t=87604 |
Page 1 of 1 |
| Author: | junior [ Wed Oct 29, 2014 2:22 pm ] |
| Post subject: | 2 Piece Headlining |
Anyone had an early 2 piece head lining recovered lately. I have had a couple of quotes around the $450 mark, I suspect there would be a few hours labour involved, plus material, Any thoughts, anyone you can recommend in Sydney (northern suburbs) |
|
| Author: | Mokesta [ Sat Nov 01, 2014 7:55 pm ] |
| Post subject: | Re: 2 Piece Headlining |
I did my own using a Newton Commercial kit. It took ages and I still ended up with a few gathers. M |
|
| Author: | Mick [ Sat Nov 01, 2014 7:58 pm ] |
| Post subject: | Re: 2 Piece Headlining |
Did you use a hair drier to shrink the wrinkles out Mokesta? |
|
| Author: | niffty64 [ Sun Nov 02, 2014 6:31 am ] |
| Post subject: | Re: 2 Piece Headlining |
I am about to do mine from newton commercial Fingers crossed.
|
|
| Author: | Mokesta [ Sun Nov 02, 2014 9:14 am ] |
| Post subject: | Re: 2 Piece Headlining |
Mick wrote: Did you use a hair drier to shrink the wrinkles out Mokesta? Yes, hairdryer and Qld sunshine and a thousand bulldog clips. It was a juggle to keep the seams straight and minimise gathers. No criticism of the Newton kit, all operator error. M |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|