Hey Guys
has anyone installed a full boot liner kit?
did you have to make up some brackets which order did you install the timber
Need Help its doing my head in
| ausmini https://www.ausmini.com/forums/ |
|
| how do you install a Mini full boot liner kit5.5GAL https://www.ausmini.com/forums/viewtopic.php?f=2&t=87850 |
Page 1 of 1 |
| Author: | micool [ Tue Nov 25, 2014 7:11 pm ] |
| Post subject: | how do you install a Mini full boot liner kit5.5GAL |
Hey Guys has anyone installed a full boot liner kit? did you have to make up some brackets which order did you install the timber Need Help its doing my head in
|
|
| Author: | Monster Mini [ Tue Nov 25, 2014 8:57 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Mine just sits there no screws |
|
| Author: | micool [ Tue Nov 25, 2014 9:10 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Thanks that's how mine is at the moment. Does it move around when you drive? |
|
| Author: | Monster Mini [ Wed Nov 26, 2014 6:47 am ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Not really cos it's jammed/ squashed in |
|
| Author: | micool [ Wed Nov 26, 2014 6:17 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Done 
|
|
| Author: | Hobson [ Wed Nov 26, 2014 6:38 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Looks good, thinking about making one up, when I get around to installing a form of music playback device, The piece that covers the rear of the tank, does that stick out past the side panel there to hold the base piece in place? Also does that jack bag have an original jack? |
|
| Author: | micool [ Wed Nov 26, 2014 6:54 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
Yep im doing a resto on the jack as we speak but I fo know where a nos one is but wont sell it to me. I can draw the boards on cardboard if you want to remake them |
|
| Author: | Hobson [ Wed Nov 26, 2014 8:17 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
I do have a 2t scissor jack that I bought off aliexpress, interesting site. Would be nice to have an original jack. Just the dimensions would be fine, I can draw them up in cad and produce a pdf for the community if that doesn't bother you. and borow works large format plotter. |
|
| Author: | micool [ Wed Nov 26, 2014 8:22 pm ] |
| Post subject: | Re: how do you install a Mini full boot liner kit5.5GAL |
its better if I trace it as its odd shapes. try do it over the weekend and ill post it to you just pm me your address |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|