Well done guys...Come on put some pic's Up
Did you start it on the floor like you were going to
| ausmini https://www.ausmini.com/forums/ |
|
| Someone Has an engine in... https://www.ausmini.com/forums/viewtopic.php?f=2&t=8805 |
Page 1 of 2 |
| Author: | aaron [ Tue Jul 05, 2005 4:51 pm ] |
| Post subject: | Someone Has an engine in... |
I wonder who? Not long to go now. Don't forget to nip up those bottom mounts! Cheers Aaron |
|
| Author: | willy [ Tue Jul 05, 2005 4:53 pm ] |
| Post subject: | |
Anton's motor is in. Lets see some pics Anton. Quicker! |
|
| Author: | gafmo [ Tue Jul 05, 2005 5:15 pm ] |
| Post subject: | |
Well done guys...Come on put some pic's Up
Did you start it on the floor like you were going to
|
|
| Author: | aaron [ Tue Jul 05, 2005 5:37 pm ] |
| Post subject: | |
Who said it was Anton? 
Doogie got his engine in the clubman today:lol: Cheers Aaron [/code] |
|
| Author: | gafmo [ Tue Jul 05, 2005 5:39 pm ] |
| Post subject: | |
BUgger we thought we had a scoop 
|
|
| Author: | aaron [ Tue Jul 05, 2005 5:42 pm ] |
| Post subject: | |
Anton May have put it in today, i just can't remeber.......
I'm not saying anything, it aint my car 
Cheers Aaron |
|
| Author: | J_A_M [ Tue Jul 05, 2005 7:58 pm ] |
| Post subject: | |
Once upon a time, there was a Mini. It had a nice standard 998, but it wanted to be bigger  . For 3 years it sat patiently waiting for some attention.
Then, one day, there was some action..... 
About 3 months later, it was hapily given a +.020" bore, 1098 crank, RE13 cam, PORTED head, twin carbs etc.....and it was finally happy 
JAM has been motorless for a LONG time......and here he is, with a big grin on his lovely slab front: 
....and is the happy motor, eagerly waiting to be fitted to JAM. 
But before we could drop it in, we had to make sure it had oil pressure. So we tried to crank it over....and tried...and tried....  My apprentice even borrowed his own starter motor, because this damn motor just would not turn over!!!!!
Finally we got it cranking and good oil pressure. Up up and away!! 
Come on mate....you are doing all the work here.....give us a smile!! 
There....there.......soon you will be tucked into bed 
and finally the original 998 motor is safely back where it was when JAM rolled off the production line
A MASSIVE THANKS TO AARON, FOR THE HELP AND EXPERT ADVICE. Couldn't have done it without you mate.....and you saved MANY spanners from being hurled accross the garage!!
|
|
| Author: | sg [ Tue Jul 05, 2005 8:11 pm ] |
| Post subject: | |
| OMFG Anton that looks horn!!!!!!!!!!!!!!.......... When's it get kicked over??
|
|
| Author: | drmini in aust [ Tue Jul 05, 2005 8:14 pm ] |
| Post subject: | |
OK... Smog Police here... put that engine down, and your hands where I can see `em..
where's the air pump... and the gulp valve... and the smog head... and the plumbing??
|
|
| Author: | aaron [ Tue Jul 05, 2005 8:21 pm ] |
| Post subject: | |
J_A_M wrote: My apprentice
Haha He's been calling me that all day, whilst saying"How do you do that, Why are we doing this, geez these Clevis pins are hard to get in, I can't get the bolt into the the engine mount..." you did well Anton, and you only scratched it once Not bad for your first go and all. But maybe you should invest in a good set of jumper leads....
Hope you got it all done. Gear shifter go in ok? Cheers Aaron |
|
| Author: | J_A_M [ Tue Jul 05, 2005 8:21 pm ] |
| Post subject: | |
Quote: where's the air pump... and the gulp valve... and the smog head... and the plumbing?? I am keeping it for the museum. A classic relic from the 70's.
|
|
| Author: | GT1360 [ Tue Jul 05, 2005 8:27 pm ] |
| Post subject: | |
thats unreal mate. good work... BIG THUMBS UP!
Cody |
|
| Author: | marcsvenson [ Tue Jul 05, 2005 8:47 pm ] |
| Post subject: | |
damn thats a good looking engine bay
good work now time to enjoy it 
|
|
| Author: | 68matic [ Tue Jul 05, 2005 8:54 pm ] |
| Post subject: | |
anton wheres the scratch hope its not bad beaut work fellas |
|
| Author: | doogie [ Tue Jul 05, 2005 9:11 pm ] |
| Post subject: | |
You pair off woossy girls blouses, how many blankets did you use???????? My god. Doogie How put his wife engine back in with no blankets & no scrathes |
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|