This is for a different gt now
| ausmini https://www.ausmini.com/forums/ |
|
| Leyland seat/door card welded seams/pressings https://www.ausmini.com/forums/viewtopic.php?f=2&t=88127 |
Page 1 of 1 |
| Author: | Traveller63 [ Sat Dec 27, 2014 4:53 am ] |
| Post subject: | Leyland seat/door card welded seams/pressings |
Hi there, I am sure this would have been brought up before, but I am wondering if anyone as the capabilities to reproduce the welded seams or decorative pressings (weld with a fake angled stitch) that were used on Australian Leyland minis (seats and door cards)? Has someone got the tools to do this? Any help would be much appreciated. Cheers Roy. |
|
| Author: | Morris 1100 [ Sat Dec 27, 2014 9:11 am ] |
| Post subject: | Re: Leyland seat/door card welded seams/pressings |
There are a few places that can do it. One in Sydney whos name I've forgotten and Dash Original in Adelaide come to mind. |
|
| Author: | Traveller63 [ Sat Dec 27, 2014 9:19 am ] |
| Post subject: | Re: Leyland seat/door card welded seams/pressings |
Thanks for your reply. Is there anyone in Australia that can do it who is familiar with the Australian minis? like is there someone I can ring up who will know exact what I am talking about etc. I am based in New Zealand. I am looking at getting a complete set done (front and rear seats and door cards)... so its not just a small touch up job I am looking for.... if you or anyone can suggest where to go.... |
|
| Author: | Bubbacluby [ Sat Dec 27, 2014 12:26 pm ] |
| Post subject: | Re: Leyland seat/door card welded seams/pressings |
As I believe, there are people that can do the normal welded lines aka Cooper S and roundy door cards and Leyland door cards. But I havn't heard of anyone who can do stitch pattern. I thought you had sourced a set of trim for your GT? |
|
| Author: | Traveller63 [ Sat Dec 27, 2014 3:03 pm ] |
| Post subject: | Re: Leyland seat/door card welded seams/pressings |
This is for a different gt now
|
|
| Author: | doogie [ Sat Dec 27, 2014 8:30 pm ] |
| Post subject: | Re: Leyland seat/door card welded seams/pressings |
One stop motor trimming in Peakhurst in Sydney has the press that can remake mk1 and mk2 trim. Doogie |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|