| ausmini https://www.ausmini.com/forums/ |
|
| Dissy change https://www.ausmini.com/forums/viewtopic.php?f=2&t=88531 |
Page 1 of 1 |
| Author: | kaka [ Thu Feb 05, 2015 5:19 pm ] |
| Post subject: | Dissy change |
Will a 29D Distributor out of a 1275 engine, work on a 998 engine? |
|
| Author: | Mick [ Thu Feb 05, 2015 5:21 pm ] |
| Post subject: | Re: Dissy change |
It will come over fine from any a-series to a-series engine, however the advance curve will be different. |
|
| Author: | kaka [ Thu Feb 05, 2015 5:44 pm ] |
| Post subject: | Re: Dissy change |
Thanks for the info |
|
| Author: | drmini in aust [ Thu Feb 05, 2015 7:10 pm ] |
| Post subject: | Re: Dissy change |
29Ds (were made only in Oz) are becoming a problem to get parts for. New caps for example are NLA, not being made anywhere. |
|
| Author: | drjbeam [ Thu Feb 05, 2015 9:17 pm ] |
| Post subject: | Re: Dissy change |
A bloke in auburn nsw has nos d29 caps he does the swap meet circuit around nsw and sells them for $30 This bloke buys all the parts from old parts shops as they closed down Ill be getting another one on the 15th if i find him at the sydney super swap |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|