ausmini https://www.ausmini.com/forums/ |
|
Going from Generator to Alternator - Help https://www.ausmini.com/forums/viewtopic.php?f=2&t=88602 |
Page 1 of 1 |
Author: | Minute [ Thu Feb 12, 2015 11:03 pm ] |
Post subject: | Going from Generator to Alternator - Help |
Hi Guys I am wanting to oust the generator and install alternator instead in a mini matic I really don't fancy pulling all the tape off the nice new wiring harness to rewire for the alternator. Is there a way to just modify the wiring at the plug of the regulator to enable everything to work correctly with the alternator? Thanks, Clae |
Author: | Skell1275 [ Fri Feb 13, 2015 6:34 am ] |
Post subject: | Re: Going from Generator to Alternator - Help |
There is a way of doing it using the original wiring and modifying the generator control box on the inner guard and using it as a terminal box, unfortunately I can't remember how as it was nearly 20 years ago I did it. |
Author: | Skell1275 [ Fri Feb 13, 2015 6:44 am ] |
Post subject: | Re: Going from Generator to Alternator - Help |
There's an article on how to do it on the mini mania website. http://www.minimania.com/HOW__TO_CONVER ... ALTERNATOR |
Author: | VulcanBB18 [ Fri Feb 13, 2015 12:08 pm ] |
Post subject: | Re: Going from Generator to Alternator - Help |
Right here on this very board in the "How to" viewtopic.php?f=25&t=27591 Or the minimania one as per Skell's link Or these ones I stumbled across years ago : ![]() ![]() (Not from a mini mag, but a 70's home improvement magazine - still looks like a mini block on page 1 I reckon) cheers, Jacob |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |