Hey all,
Can someone tell me what size engine this is, by going off the pictures?
Lucas
| ausmini https://www.ausmini.com/forums/ |
|
| What Size Engine ??? https://www.ausmini.com/forums/viewtopic.php?f=2&t=8863 |
Page 1 of 1 |
| Author: | Konzo [ Thu Jul 07, 2005 3:27 pm ] |
| Post subject: | What Size Engine ??? |
Hey all, Can someone tell me what size engine this is, by going off the pictures?
Lucas |
|
| Author: | Matt68 [ Thu Jul 07, 2005 3:30 pm ] |
| Post subject: | |
1275cc from a morriss 1100s But i could be wrong. Probably not tho 
Not sure if it's an auto or not. Search on here about engine identification and you'll find links to pages that'll show ya. Matt |
|
| Author: | Konzo [ Thu Jul 07, 2005 3:34 pm ] |
| Post subject: | |
Thanx Matt. I was told it was a 1275 from a Morris 1100s ... I was just checking ... so its all sweet 
|
|
| Author: | sociallydisabled [ Thu Jul 07, 2005 3:40 pm ] |
| Post subject: | |
yep same numbers as my engine, and according to various books, it is from a morris 1100s. Are these good engines? and how different to mini engines are they? if any difference at all |
|
| Author: | drmini in aust [ Thu Jul 07, 2005 7:27 pm ] |
| Post subject: | |
sociallydisabled wrote: yep same numbers as my engine, and according to various books, it is from a morris 1100s. Are these good engines? and how different to mini engines are they? if any difference at all
It's a Morris 1100S manual, 1275cc. Yes they are good. Pretty much the same as a 1275LS or 1275 Moke. Engine mounts at fan end are different setup, you just cut them off the front engine plate or use a Mini plate. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|